Hi, I have just finished a 200tdi conversion in my E Reg 110 van - might consider a swap for a 90. I am also in Staffordshire. Will sent you an email shortly. Thanks Dan
Andy,
Can't help with the engine, but just done a 200tdi conversion myself into an early 110 NA - may be able to help if you get stuck with anything.
Cheers Dan
Hi,
Relatively new to the forum - been using it for reference while working on my Land Rovers.
Based in Staffordshire and own an early 110 van - recently converted to 200Tdi and a Series 3 109 Safari SW (currently stripped and slowly being put back together)
Are there any local clubs /...
I think I paid £50 all in for the new exhaust and bits (buying the 3 separate pipes off 3 different sellers at a landy autojumble)
Just measured the 300tdi exhaust, I would say circa 60mm OD and 57mm ID if that helps.
Just checked again and the complete 300 (non cat) exhausts are...
My manifold down pipe ended at chassis rail level - I got the full exhaust for a 300, including the downpipe. I cut the manifold flange off the vertical part of the pipe - this was then a snug fit over the drop pipe. I then had to shorten the horizontal part of the 300 downpipe by cutting and...
Hi,
I've just done a 200tdi conversion on a 2.5 NA diesel 110. In terms of the exhaust I fitted a 300tdi exhaust straight off the downpipe. It is a slightly larger diameter than the 200tdi exhaust (which is a good thing) and is also cheaper than the 200tdi. You just need to fabricate new...