Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. W

    Poor Starting issue.

    No bleed pipes and it now occurs to me that I should have said its a TD5 and not a 200/300tdi sorry for any confusion.
  2. W

    Poor Starting issue.

    It looks like I'm going to have a problem. This morning the glow plug light only came on for a fraction of its usual time. Car turned over and started ( lumpy) but cut out after a couple of seconds. Did it a couple of times then ran. There is no smoke or steam on start up either Has started and...
  3. W

    Electric window programming.

    Problem is that the windows stay powered after ign is off for about 45 seconds. during this period my dog stood on the buttons and lowered the window with the one press option. She doesn't understand the double tap option LOL. But yes the regulator will need changed at some point.
  4. W

    Electric window programming.

    Evening everyone. I have a current problem with my drivers side front leccy window. If you do the "one touch down" it comes completely off of the toothed qaudrant ( the end is chewed and worn). I know it'll need reolaced but in the interim I wondered if the one touch down could be disabled by...
  5. W

    Looking For Somewhere in Aberdeenshire For a Disco Remap

    You could phone Dave coutts at DMC performance Inverurie. If anyone knows someone to do it locally, he will.
  6. W

    Lower you air suspension when required.

    Well its already been done but much more in depth than i had in mind. my idea was to fit tee pieces to the bag lines and electrical solenoid valves to dump the air from the valve. The same sitch to work the solenoid valve would also work a relay. Which would trip out the compressor because i'd...
  7. W

    Lower you air suspension when required.

    I am certainly NOT offering a service but I can see where you get that idea I will amend the post. I was merely looking for ideas on how usefull it might be to others If I was to do a how to on this.
  8. W

    Lower you air suspension when required.

    Where?? why?? have i done something i shouldn't have? Apologies if i have and i'll remove the thread but at the moment I don't understand.
  9. W

    Lower you air suspension when required.

    As the post says really. Given the price of key fobs for lowering the suspension and picking up a trailer or caravan on the tow hitch ( or even getting it in though the garage door thats just that wee bit too low) how usefull does the collective think a self contained set up would be if it could...
  10. W

    How best to dry it out

    Getting a half litre one LOL my daughter has one. Do they really work at getting fluids out of upholstery though??
  11. W

    How best to dry it out

    Well I thought my landy was leak free. Untill a downpour last week showed water ingress. BUT it was parked nose up on a steep hill so Ithought "OK the roof drains are at the front so it'll be water running over the back of the drain tray" So I started parking it nose downhill and all was OK till...
  12. W

    cyclic vibration

    I've only visually inspected the doughnut to be honest. I cant get it in my garage due to height and my drive is steep so cannot drop the prop as it'll roll downhill. Will try at the weekend to get it dropped and see. I should have added that i also have a clunk when going off and on throttle...
  13. W

    cyclic vibration

    Evening all. I have a cyclic/pulsing noise/vibration coming from the rear of my disco. It comes in at around 57mph and goes after about 70mph ( sometimes). Its worst at full throttle acceleration and goes away if you lift off. Similarly if you take it up to 70mph and let it slow down or dip the...
  14. W

    Welding and the ecu's Will they lose memory?

    Excellent many thanks.
  15. W

    Welding and the ecu's Will they lose memory?

    Thanks guys I'll get it unplugged as well then. Any issues with it needing reprogrammed though?? or just plug it all back together.
  16. W

    Welding and the ecu's Will they lose memory?

    The big ECU beside the battery will be unplugged and removed total. Any others I need/should do??
  17. W

    Welding and the ecu's Will they lose memory?

    Hi guys I'm about to undertake welding to the front wheel arches ( inner) where the rot has taken hold under the plastic guard. I will need to remove the battery and fuse box/expansion tank etc to get at the rot as well. As the battery and ecu will be removed is there anything that's going to...
  18. W

    Central locking gremlins....

    Mines does this at times. I find if I lock it again and then unlock the drivers door knob pops up OK. Doubt its the receiver as it wouldn't open any doors if it was In my opinion.
  19. W

    engine oil grade

    Never said I was scrimping did I?? Just dont see the poinfs in paying extra for what at times is just a brand name. Its a bit like supermarket fuel versus forecourt fuels. Yes I realise that an engine is not the place to scrimp BUT if the grades etc are the same ( which they should be) then the...
Back
Top