Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Dunk1302

    Just fitted a Rev Counter

    My vote goes to the threaded terminal at 12 o'clock in the picture. Pretty sure I used a ring connector when I fitted mine, rather than a spade connector This might help - it's not the same alternator, but the pics at the bottom might help? Dunk
  2. Dunk1302

    Just fitted a Rev Counter

    Wiring it in is the easy bit - just a feed from the 'W' terminal on the alternator, and an earth. Fitted one to my 2.5N/A a few months ago. The tricky bit is calibrating it to your engine, if you want it to read accurately. If you can work out all the gear ratios from engine -> wheels, you can...
  3. Dunk1302

    Bare ally!

    Here you go...... ok it's a Series, not a Defender, but you get the idea: PS - It's not mine, and I don't know how/why it was done!! ;) Dunk
  4. Dunk1302

    Peterborough lr show Saturday

    I'll be there saturday morning in my ex-MOD D90...... it'd be rude NOT to go as it's on my doorstep :) Dunk
  5. Dunk1302

    Ex RAF 300TDI

    Interesting..... the only MOD 300Tdi is the Wolf, but they're much higher priced than the older naturally-aspirated diesels (thing they start about the £6k mark). Look for a spare wheel mounted on the passenger's side rear body panel and a protruding vent on the side of the front wing - the...
  6. Dunk1302

    Is it possible to test a PAS box......

    .......without fitting it???? I got an outwardly tatty-looking 4-bolt PAS box for free when a mate bought an old RR axle, but didn't need the box. Is there any way to test if it's use-able WITHOUT having to go to the trouble of fitting it (to my non-PAS D90) and plumbing it in? Cheers Dunk
  7. Dunk1302

    i was thinking of buying ed mod...

    Does it make a difference how you explain it to the insurers? If/when I eventually finish re-building my spare 300tdi engine, I'm hoping to drop it into my ex-MOD D90 N/A....... If you were to explain to the insurers that you've replaced a 2.5l Land Rover Diesel engine with a 'slightly newer'...
  8. Dunk1302

    Looking for some Iraqi Snatch footage

    Yep - IIRC, there were a set of stone steps in front of the doors, and they drove the LR straight up the steps and through the front door - KNOCK KNOCK, ANYBODY HOME???? :D
  9. Dunk1302

    Looking for some Iraqi Snatch footage

    That's the one!...... not sure if it was the Para's - while searching for the footage I found mention on the arrse forum suggesting it might've been RM
  10. Dunk1302

    Odd question - gear knobs

    No, I put the std part number FRC8722 in the search box and it came up with the knob for about £3 However, that's with the rubber insert still, not a thread (I don't think there is a standard part which is threaded). I found the rubber insert was too stiff :eek: to get the thread started...
  11. Dunk1302

    Dilemma!...2.5n/a or TD5

    +1..... I recently bought a very straight and tidy ex-MOD D90 n/a, with a view to transplanting the spare 300tdi engine that I'm currently rebuilding. A few other points to bear in mind if you're thinking about the earleir model: No power-steering - in a 90 it's not too bad apart from...
  12. Dunk1302

    Ashtray What's in yours?

    There's a spent 5.56mm cartridge in mine - it was there when I picked it up from the MOD disposals :violent:
  13. Dunk1302

    Odd question - gear knobs

    I recently bought a new one from Paddocks for just a few quid......
  14. Dunk1302

    Looking for some Iraqi Snatch footage

    LOL - well spotted!!...... I was mixing up my looney despots - meant to say Saddam's palace :D Dunk
  15. Dunk1302

    Looking for some Iraqi Snatch footage

    All, I distinctly recall seeing a news clip during the gulf war, of some brit troops ramming a snatch Land Rover through the front gates/doors of (I think) one of Ghadaffi's palaces. I was describing the scene to a mate at the weekend, and I've trawled youtube for it, but had no luck - any...
  16. Dunk1302

    If I have 235/85 tyres, can I have a 7.50 spare??

    Thanks chaps - that'll save me an extra ~£120 ;)
  17. Dunk1302

    If I have 235/85 tyres, can I have a 7.50 spare??

    Evening all..... I'm thinking about changing the 7.50x16 Michelin XLZ's on my ex-MOD D90 for some 235/85x16's with an AT pattern that'll be a bit better behaved on tarmac. The question is, do I need to buy 5 new tyres or can I get away with 4, and use the existing 7.50x16 on the bonnet as a...
  18. Dunk1302

    Urgent help needed please!

    Does the engine turn over at all?? If not check the engine earths - I had a nightmare with my 200tdi refusing to start...... connecting a jump-lead direct from the engine to the -ve battery terminal identified the problem straight away Dunk
  19. Dunk1302

    EX MOD 1985 n/a 2.5 110 - Advice please

    Yeah..... just on the driver's side....... HOWEVER, I don't think the passenger's wing-top is original - the paint is a different shade, and looks brush-painted, while the other panels still have the original spray-finish. Dunk
  20. Dunk1302

    EX MOD 1985 n/a 2.5 110 - Advice please

    Ahhh gotcha - cheers matey....... I'm gonna keep mine too and maybe stick a snow-guard on the other wing-top for 'balance' :) Dunk
Back
Top