Search results

Just fitted a second hand engine to my Diesel P38 2.5 which came minus the fuel pump. I do not know if the engine was turned while the pump was removed and need to check that the fuel pump sprocket is in the correct position. I can not find this info in the manual and wondered if anyone can...

I need to R&R my inlet manifold tomorrow on my V8 as it is leaking oil. Done one many years ago but can't remember much about it. Anthing to look out for or any pointers welcome. Have got new Gasket and seals at the ready. Ta.

I have fitted the early non serp type engine in my Disco (1998) but the engine came without a distributor. The original one will not drive the oil pump as it is from the serp engine. Any one know which model I need or has one lying about??? Thanks.

I have a 1998 Disco V8 auto which has an additional Land Rover Engine Immobiliser using a Green fob and Gold Fob. The car has been standing for the best part of a year and now that I want to get it running again, there is no response from the Additional immobiliser. The instructions say to hold...

Subsequent to my recent posts, do any of you clever people know what size threads are on the oil cooler connections which are on the early V8 engines fitted into the early Range Rovers ie not Serpentine engines which have a different fitting? I have found someone who keeps the fittings but I...

So, I have a non Serp engine in my Discovery(3.9 V8) and the oil lines from the oil pump housing to the radiator oil cooler are giving me a headache. Everyone seems to have Serp type but not the type I need. Anyone got a clue as to what to use. I know I can get some made up but I need both my...

Hi, Can anyone confirm that a Serpentine engine, which I had to take out of my Disco can be replaced with a NON Serpentine engine and I can switch the timing case, oil pump, pulleys etc to make the Non Serp engine into a Serp? If you get my drift. I understood that the Crankshaft was slightly...

I recently bought a 1998 Auto Discovery with a 3.9 V8 and LPG conversion but with a duff engine as I had a spare engine in the garage(like you do). The engine that came out is a Serpentine but the replacement is a Non Serpentine. Can I put the pulleys from the serpentine engine on the Non Serp...

I am replacing the engine in my Disco 1998 3.9 Serpentine. I have another engine which is not a serpentine but is a 3.9 Hotwire(same as the original). Will the Serp crank and front end fit onto the other 3.9 engine? Thanks.