Search results

Hi I am fitting ge glass back into my series 3 truck cab. Does anyone have any itting instructions which will help? Thanks

Hi, I have fitted a new master and slave cylinder and a new flexible hose on my series 3 with 200tdi fitted. I can't get a clutch, have ezybled it reverse bled it but no joy. I have put a plate across the slave to stop the piston coming out but still no peddle. If I blank of the master cylinder...

fitting 200tdi into series 3, trying to start engine before rebuilding rest of car. Rebuilt injectors, new lift pump, new battery, timed, fuel bled. Will not fire but will fire on easy start but dies when easy start removed. Anyone near to Holmes Chapel, junction 18 M6 HELP!!

Putting 200tdi into series 3. Want to check it runs OK before going any further. New head gasket and timing belt fitted by Land Rover specialist. New battery turns over freely, fuel stop solanoid working, timing correct, fuel system bled tappits checked and OK. Tried small squirt of easy start...

Fitted a 200 tdi. into a series 3 new battery turns over freely, timing correct, fuel delivery to the injectors is good, glow plugs working, fuel solinoid is working, tried a small squirt of easy start, just a little and she appeared to fire. Any help as I am now at a loss, tap pets also...

any suggestions for alternative seats into a series 3? And any fitting tips?

i am fitting a 200tdi into a swb series 3. Also fitting power steering with defender column. Has anyone got a wiring diagram so I can make up the loom? The column I have has Lucas 162 AS fitted. Thanks

I have a used set of parabolic springs I want to fit to S3. The bushes on the front springs are larger than standard and I have been told these are no longer available. Does anyone know where I can get a set or have any suggestions?

Hi, I am fitting parabolic springs to my series 3. I need new dampers and extended brake hoses. Which are the best to fit? Any suggestions?

Hi, 200tdi engine and gearbox now installed, bulk head is next but does anyone have a wiring diagram for the the 200tdi into a series 3? I would like to connect the wiring and fuel line to check that the engine starts and with the cluch connected check it drives OK.

Hi, I am just about to fit a 200tdi into my series 3 and need to fit series 3 engine mounts. Can I use mounts from any 2 1/4 series engine? Also anyone got any spare?

Hi, in the middle of my S3 restoration, chassis is rebuilt and much stronger than origional, both axles and brakes rebuilt (11" front). I now come to fitting the 200tdi and gear box. The engine is getting new belt, crank seals head gasket and sump gasket. My next issue is the exhaust, do I go...

Hi, can anyone advise me what are the largest wheels/tyres I can fit to a series 3. If I want to go bigger what do I need to do? Thanks

I am installing a 200tdi in to my series 3 SWB. Can anyone give me advise on what I should do to the engine before I install it. Obviously a new timing belt is a start anything else?

Hi I run a Freelander 2 every day and cover approx 40K per year. I am restoring a series 3 and putting in a 200tdi, any advise on the conversion would be appreciated. Talk again soon.