Search results

I understand comments but i have just got a field in the middle of nowhere. Its not a case in need a winch but its a just incase i need to get out of a difficult position and would not like to leave my 90 by itself ( it wouldnt be there intact for long) . I would like something that would get...

Employed a young lad that was more intrested in his phone than getting on with the job. Didnt last long. Does this count

I am looking at putting a winch on my 1994 defender 90. I dont need one to pull me up a cliff face but enough power when needed. The winches i have looked at are all in lbs not kilos. What size winch would people recomend.

What sealant are people using to seal the sump on a defender 300tdi

Just put a rev counter on my defender 300 tdi. Could someone tell me what revs they tick over at so I can set it up propely

I used fiberglass to make it sturdy then bought some 4 way streach material off eBay .use heat resistant spray glue .I took my time and was impressed with the finished product

Going to put some chequer plate wing tops on . Is there anything I should put between the chequer plate and wing or should I rivit them straight on

Going to replace Cam belt on my defender 300tdi. Bought a kit and came with an instruction that when fitting the idler pulley stud if there is not a 2mm by 45 degree chamfer to where the stud goes in to make one with a countersink tool. Can anyone tell me why . Is there a specific tool to do this.

Going to put a new timing belt on my defender 300tdi. Where's the best place to buy a kit. (Cam belt /tensioner etc ) what should I look out for and what should I avoid

No. It's at the other end near the air box .It's only about 5mms wide. And comes out of the pipe with an elbow

I'm

I'm not shure .when I got the hose it had that small pipe on and couldn't find where it went

Putting my 300tdi defender air intake back to standard. The pipe that I have got. from the air box to the turbo on the first bend from the air box it has a small pipe connected to it. Can anyone tell me where this goes or is it needed because I can't see this pipe on any diagrams.

Wanting to put my 300 tdi air box back to standard but have not got the bracket that bolts to the head. what are people's thoughts on this. would it be ok to undo the two bolts fit the bracket and torque the bolts back up or would i have to replace the head gasket aswell

I have bought a few panels from sp4x4. panels have been spot on

Can anyone tell me what this part is and what it does . I have a 90 300 tdi bolted to the inside of the drivers wing there's a plate says on the plate xbl 10003 21r. On that plate is a gold electrical item 2 1/2 inch long by -1 1/4 inch pop rivited to it . it has 2 wired coming from it going to...

About 6 months ago i am still putting it together. had to put 2 small shims on bulkhead footwell brackets but nothing major

I bought mine from Richard S chassis at Doncaster cost me £1,890 brand new.the service they provided was very good