Search results

i take it you have central locking on the truck try putting the key in the boot when the locks are open dont turn it if the door wont open then just move the key slightly untill you see the door pin raise the boot will then open , i think the problem is a worn central locking motor i have...

i figured it out its not just the trim thats curved its the bloody doors the drivers door is shorter one side than it is the other the front door is 15mm shorter at the door post than the back were the handle is can someone check theres to see if they are supposed to be like that ? i measured...

thanks for the replies firstly i tacked it together every 8" or so then fully welded them together i used a stick welder with loads of amps on to get some good penetration, secondly ? curve ? is that just the plastic trims or the sills im almost certain that the sills are straight (i think )...

thankyou for the welcome

hi all first real post from a newbie so pease be gentle lol ok so i bought a 5 door 300 tdi on a m reg needing some welding as you do i figured i would fit box section into the sills (120 x 60) to be a little bit lower to allow for some rock /tree sliders to be welded on the side so thats the...

hi all i thought id introduce myself the names chris aka muddypluka ive recently aquired a 300tdi in need of some tlc firstly the dreaded sills lol then inner rear arch bit of aservice and we should be allgood for the mot ive built an offroader out of a 200tdi and soldit due to finances im...