Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. mastarforth

    chassis and Bulkhead Replacement Recommendations North East England

    Bump, I am back to needing this done. I was not in the country long last year but I need this done as the car has stood still for quite a while. Really looking for any advice on who you have used for the repalcement. Thanks
  2. mastarforth

    chassis and Bulkhead Replacement Recommendations North East England

    Hi Everyone I am looking to get my Land Rover 110 chassis and bulkhead replaced imminently and im looking for recommendations for who to use in the North East. Any advice appreciated Thanks andrew
  3. mastarforth

    Northumberland getting hammered

    @Hippo I would love to The police investigation is still ongoing so would not want it to effect that....
  4. mastarforth

    Ignition wiring advice

    Hi everyone I was fortunate this week to not only have my 110 stolen but down to the powers of Facebook managed to locate it within a 12 hours. Anyway, as part of its recovery, the driver started it using his own key which tells me the barrel must be damaged. The vehicle was Ex-mod and has a...
  5. mastarforth

    Northumberland getting hammered

    HI all, Also Tyne and wear my defender was nicked last weekend. Luckily the powers of facebook, and I manged to locate it within 12 hours and got it back. A lot more protection going to be installed to protect it now but..... I also have cameras installed so I have the pictures, and video...
  6. mastarforth

    exmod defender transfer box type identification

    thanks for your replies... oh well it will need to wait until i get back to look at it then
  7. mastarforth

    exmod defender transfer box type identification

    hi guys I'm currently looking at a change in engine etc. on my 110, and I am wondering if anyone could point me to a thread advising what my transfer box is likely to be it is a 1992 ex-MOD DEFENDER 2.5 NA diesel. I am Assuming it has the 1.44 ratio but I am not at home so cannot check...
  8. mastarforth

    Tub to hard top dimension, and whine/whistling above 20mph

    Hi everyone I’m trying to work out why this may not be alligned. Can anyone send me a picture of the rear corner of their defender please I am wondering if this thick washer has been put into the wrong place on rebuild after paint as I think this thickness would be all I need to make a seal.
  9. mastarforth

    Tub to hard top dimension, and whine/whistling above 20mph

    Hi Neilly Sorry for me explanation Is there an expected gap from the top surface of the rear tub to the bottom edge of hard top when it is correctly fitted, like the door gap being 7-11mm depending on location? The gap in places now that i have the car back is so big the seal is not being...
  10. mastarforth

    Tub to hard top dimension, and whine/whistling above 20mph

    hi everyone Having carried out quite a bit of renovation work to the defender, I am not happy at how the rear bar top fits to the body after it’s return from the paint shop. can anyone point me to a page in a manual to show me the dimension that the gap between body to rear tub should be...
  11. mastarforth

    Rebirth of an ex-Mod 110 defended FFR

    well after fitting the tank I decided to keep going to fitted the sound deadening Think the back is quite a transformation! I have panoramic windows to go in soon and forward facing rear seats!
  12. mastarforth

    Rebirth of an ex-Mod 110 defended FFR

    Now that job is a pain in the behind! Some jobs you need 2 people and when you only have one then you have to use legs to lift the jack and arms head as I am sure most of you already know. haha All done though on to tightening it all up and fitting pipework.
  13. mastarforth

    Rebirth of an ex-Mod 110 defended FFR

    Thanks for your reply I havnt yet fitted the 300tdi. But I managed to find it at the back of the engine 11j so it is the 19j bottom end. Anyway, looking for a bit of advice on refitting a petrol tank. Only 4 bolts but very awkward haha. The tank is the rear typ. And I am guessing it would...
  14. mastarforth

    Finding engine number on a 1992 exmod 2.5 N/A d engine

    Thanks for your help everyone The number is on the ledge towards the back of the engine, just where fingers cannot get to easily! Paperwork to be sent today!
  15. mastarforth

    Finding engine number on a 1992 exmod 2.5 N/A d engine

    Just to be sure I am in the right place...... is this the ledge that I should be looking as it does not look like it will have anything there
  16. mastarforth

    Finding engine number on a 1992 exmod 2.5 N/A d engine

    I'm registering the car with DVLA so need it for the paperwork. It's an exmod land rover
  17. mastarforth

    Finding engine number on a 1992 exmod 2.5 N/A d engine

    Is that this ledge? Looks like a lot of grunge I will need to clear over weekend!
  18. mastarforth

    Finding engine number on a 1992 exmod 2.5 N/A d engine

    Hi everyone as the title really, any advice on where to find/ how to clean back the engine number on my ex mod 110 defender I have looked in the area behind the water pump on the passenger side of the vehicle but it does not appear to have any markings is there anywhere else to look? Thanks...
  19. mastarforth

    Rebirth of an ex-Mod 110 defended FFR

    Well I havnt updated for a while but progress has been made! Last week I got the car through its MOT and I am now trying to register the vehicle! Only one minor problem when I came to look for the engine number I cannot see any markings. On the from passenger side of the engin Any ideas or...
Back
Top