Search results

I have done a few searches and not came up with anything to identify the front hubs/free wheel hubs fitted to the front of my SWB 69 S2A Anyone any ideas? Inner hub seals are gubbed so will need to strip them down and thought I would ask first in case there is anything I should be aware of...

I bought a new rear stub axle for my 1969 2A swb and the supplied part Britpart 599827 which was listed as 'up to 1980' but as the picture shows it's different. I'm awaiting a response from the supplier but thought I would ask here meantime. Any suggestions? Looks like a standard axle.

Bit of advice required. Stripped down rear hub to do inner oil seal and here's what the stub axle looks like. Should I replace stub axle? Wheel bearings are fine and correct me if I'm wrong but the badly pitted area on the stub does not come in contact with bearings?

I have a series 2A 1969 swb fitted with a V8. The current engine came from a mid 80's RR and currently has the Lucas M3100 starter fitted. Although the starter works, it is a bit slow and if the engine does not start right away, it struggles and drains the battery. So my question...

My 200tdi cut out on way home tonight whilst driving at 30mph in 4th gear. Wouldn't restart, just turning over acting like fuel starvation but as I have a full tank I ruled that out. I had to be towed home and when i got there I removed oil filler cap on rocker and whilst turning the engine over...

Hello everyone, about time I actually joined as I have been reading here for a while! The main reason I joined... I recently just bought a 1993 Discovery 1 200tdi which I thought I had got cheap but since I have replaced quite a few bits and bobs and done loads of unexpected work, that is no...