Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. archwayanimal

    Disco 2 Bottom windscreen finisher seal gap?

    The rubber seal at the bottom of my windscreen is pretty tired - should it be forming a proper seal against the windscreen? Won’t water just run down the windscreen into the heater intake? Therefore should I try to replace or just stick this against the windscreen with some black mastic? I think...
  2. archwayanimal

    Replacement 1/4 rear chassis

    Assume this is a dumb question - need a new 1/4 rear chassis for a 2003 D2 - found one which has 900mm extensions rather than 600mm - does that just mean the “arms” are longer and therefore can replace more of the rusty bits?!
  3. archwayanimal

    Discovery 2 - front right speakers no sound

    I have an aftermarket stereo fitted in my 2003 D2 - used to work perfectly. Now the front right speakers don't have sound - if you stick your ear by them you can just about hear something. Rear right all fine - and rest of car all fine. Is there a fuse to check? No-one has tampered with the...
  4. archwayanimal

    Disco 2 Facelift - binnacle screws

    the two screws that hold the binnacle and mount together at the bottom of the mount are missing - does anyone have a part number or know the size? thank you!
  5. archwayanimal

    Rear bumper

    May be a dumb question - have just bought a rear bumper off Marketplace to replace the smashed one on my 2003 Disco 2 - assume there is no difference between pre and post facelift rear bumpers? Can you buy the wrong one? Car not with me at present but it looks the same to me!
  6. archwayanimal

    Disco 2- rear bumper foam piece?

    Bought a second hand bumper to replace mine - the new one has a piece of foam stuck on the inside on one side, but no the other so assume missing. Is this important and does anyone have a part number? It's the curved bit in the photo - sorry about the shadow. Thank you!
  7. archwayanimal

    Nanocom Evolution for sale

    Hardly used. With up-to-date software for Defender and Discovery 2 TD5. Please pm with offers. NOW SOLD
  8. archwayanimal

    Disco 2 Reset gearbox adaptive values

    have recently had a remap done by Alive Tuning and all my recent problems seem to have gone, although the gear changes don't feel right. Just wondering if I should do the adaptive value reset so the ECU can relearn my driving style? Do have a Nanocom. Assume its ok to do this after a remap?
  9. archwayanimal

    Disco 2 Nick Shurrock

    has anyone used Nick Shurrock from Princes Risborough and has his number? Looking for an expert to fix my Disco and his name was mentioned. Many thanks.
  10. archwayanimal

    Disco 2 Fitting Air Bleed Valve Kit

    Have been recommended to change this - is it straitghtforward. Assume it is the pipe towards the rear and nearest the wheel. Unscrew one end and carefully pull out the other? Many thanks!
  11. archwayanimal

    Disco 2 D2 splutter

    my 2003 D2 has started to splutter now and again - seems to be running just fine then I'll get a splutter and then it's fine again. Not all the time - did it just now as I was accelerating at about 40mph and then again at 60. Any ideas?
  12. archwayanimal

    Disco 2 New driver seat cloth

    I need to replace the cloth on my driver's seat base. Could someone help identify the colour/cloth. Have attached a photo, but the middle is sort of velour and the sides are leatherette - colour is a bit almond on the sides and slightly greener in the middle! Car is 2003 D2, possibly XS...
  13. archwayanimal

    Disco 2 high pitched squealing

    I'm getting a high-pitched squealing from underneath my 2004 Disco 2 at 30mph - happens both when accelerating and cruising. Sounds metallic - and definitely underneath so not engine related. I have greased the UJs but maybe need more. Any suggestions gratefully received!
  14. archwayanimal

    Is it worth changing a steering box with slight leak?

    Would appreciate views - have a 2003 D2 with a steering box that has had a slight leak for the last couple of years. A few drips a day - so not pouring out, and after a decent clean got past MOT without an advisory (but has had for the last three years about this). Is this something just to...
  15. archwayanimal

    ACE fault 06-05

    Checked for faults using Nanocom and came across an ACE fault: "Fault 06-05 Pressure Control Valve Current Too Low" No warning lights on dashboard - is this something to be concerned about or should I ignore? many thanks!
  16. archwayanimal

    Nanocom newbie - SLS problem!

    Helping a mate replace his SLABS ECU today - all done just trying to calibrate SLS height as car sank to its bump stops when new ECU connected. Did it by raising left then right sides, pressed store settings, turned off ignition and waited 60 seconds, turned back on and the car sank onto its...
  17. archwayanimal

    So, here's a bit weird...

    Currently have removed old remote receiver due to key fob not working, and having to lock/unlock D2 with key. So yesterday filled up with diesel at garage, left car unlocked, went off to pay and when I tried to start the car nothing happened. No turnover, nothing. All the instrument lights came...
  18. archwayanimal

    Painted bumper end cap

    Need to replace my nearside front bumper end cap. Can find them primed and ready to paint, but I paint like a child after too much orange Tango. Has anyone come across someone selling the finished article painted to your spec? Many thanks!
  19. archwayanimal

    Chugging when slowing down

    Hi there - my Disco 2 runs beautifully, but when slowing the engine does seem to make a chug chug noise before being steady when I stop - noticeable to mates as I approach the station every morning. Have been told by another Disco owner that this is normal - but is it really? When idling...
  20. archwayanimal

    Remove dash air vent

    Does anyone know how to remove the driver's side air vent on the dash - looking at pics of new ones there seem to be tabs on the side keeping it in place, but the flange around the face of the vent would make it tricky to access these to release. Anyone achieved this? many thanks!
Back
Top