Search results

thats great cheers.it's saved my time trying to find a std diff, thanks again

i've recently had a standard one that wasn't red inside, it was off a td5 so don't know if that makes any difference?

hello can anyone tell me the diameter of a standard salisbury crown wheel , i've bought a heavy duty one and this is about 12 inch, i was always lead to believe a heavy duty version was painted red inside, is this right ? cheers in advance for any info on this

yeah the throttle housing (the bit on the end of the inlet manifold with the butterfly in it) they got updated with an alloy housing rather than plastic, i think the plastic ones warp slightly copy and paste this link for a picture of it: Elise S1 S2 Parts 52mm Alloy Throttle Body | Hangar 111...

try the throttle housing,

sounds like it might be the spider (immobiliser control unit behind centre dash facia) , you can get a bypass connector to get rid of it for a few quid

Hello to all I'm not sure if this is the right place to post this , so sorry if it's wrong. I'd like to bring to everyones attention a new land rover auction/classified site, www.landyauction.co.uk, The site has been set up to avoid the ever increasing fees other auction sites charge.We are...

hello i've got a k series freelander that over heated due to HGF, the headgasket was replaced along with the head being skimmed and pressure tested. the car starts up and drives perfect when cold but when it's up to temperature it starts misfiring/back firing and loses all power? a lot of...

have you got the child lock on?, i had a similar problem with my rear latches stopping working and because i had child lock on i had to remove the rear door trims with the doors shut

hello all i've just bought an ex MOD series 3 109 station wagon , it originally had a v8 in it although it's now got a 2 1/4 diesel in it. it has an 8 digit vin number starting 9319....c does anyone know how i can find out when it was built? or anything about it? cheers

i've known this same problem, the tyres were fitted to the back though , still the same outcome though

13mm spanner, it has a automatic tensioner on the later 1.8's

hello it could be one of a number of things: the clutch arm starting to seize in the gearbox casing, the clutch hydraulic bracket on the gearbox broken,lazy clutch hydraulics or maybe the clutch is starting to wear and not clear, all the other gears will select ok as the car will be moving . i...

when i bought my freelander it was the same, all i've done was move it back over and haven't had any problems or movement since.

possible the prop bearings

no it's not a cat, just a centre box, you can replace it with a straight through pipe if you want.

unlucky!! try slightly warming the 2 legs of the clip, (only very slightly though , they melt quick) it makes them a bit more plyable

are the front radius arm bushes ok?, i've known them cause pulling to one side or another. maybe worth a quick look under your car

the drivers door latch in knackered and the bleeping is due to the remote battery being low hope this helps

it's a genuine part ,as far as i'm aware there isn't an after market version about yet,