Search results

Hi All I've just replaced battery and starter motor on my 55 plate TD4. Turned the key and nothing happened. Ran a scan and I got the following message: EWS Immobilisation malfunction (0x1DF5) Followed the handbook (5 presses on lock button to re-pair). Cleared the error code and tried again but...

Hi All Changed glow plugs this weekend (pig of a job). Put everything back together and it won't turn over. Put the battery on charge, took everything apart to double check my work. Put it all back together and still nothing. Did a scan and it's throwing up: CAN message failures P1E00 Vehicle...

Hi All Took my 55 plate TD4 for MOT after 6 weeks off road since failing the last one. Fixed everything that it failed on last time. Got a call from the garage to say they abandoned MOT as they think there is an issue with the engine bottom end. Any advice? Thanks.

Had the dreaded two amigos on the dash - TDC/HDC. At this stage brake lights worked as normal. Took out brake light switch - which practically disintegrated in my hand and replaced with new. Reconnected all wires as before. Warning lights now gone but brake lights aren't working. Need to get...

Since my 55 plate TD4 has been off the road (MOT failure), I've been carrying out all the necessary repairs - as well as some others that I came across on my travels. One of those was that the roof lining started to sag and got worse by the day. Decided to have a crack myself, what do you think...

Since my 55 plate TD4 has been off the road (MOT failure), I've been carrying out all the necessary repairs - as well as some others that I came across on my travels. One of those was that the roof lining started to sag and got worse by the day. Decided to have a crack myself, what do you think...

Hi All Had a failure on the MOT for the propshaft. VCU is fine but needed to replace universal joints and both centre bearings. Took out the whole thing to work on in the garage to make it easier. Replaced the UJs and the bearing on the rear propshaft no problems - came apart without too much...

Hi All Got the dreaded two amigos TC/HDC lights. Took out the brake light switch and opened it up to have a look and one of the contacts inside had snapped/corroded. Fitted a brand new replacement but lights still showing. Should also mention that brake lights are working.

Hi All New to the forum. I've got a 55 plate Freelander TD4 Sport, had it since 2017 - still loving it - even with the odd gremlin! 👍

Hi All I have a 2005 Freelander TD4 Sport, and I was popping off the switch blanking plates on the centre console to install a USB socket and found a plug in the back of one of the blanking plates. It's not the rear window switch which is just out of shot. Any ideas? Thanks