Search results

Did anyone go? Just seen a video blog thing on YouTube and it seemed very quiet indeed on Sunday. Don't know if Saturday was any busier.

One of the first things I did when I bought my TD5 90 was fit a centre silencer delete pipe, Ebay bargain, £1 if I remember correctly. Really made next to no difference to sound levels. Today I spent half a day making up a silencer delete rear pipe and looking forward to a but more noise, was a...

My son's D2 has a air deflector type thing that is attached to a bracket at the rear of the sill cover, located in front of the rear wheel. Can someone point me in the right direction for the bracket and what it's called. Sorry its a bit vague but below is the photo I am dealing with. Might be...

Putting together a Greenlane trip for May Bank holiday Mon 27th. Intending to start about 9am North West of Reading and head down towards Lambourn and onto Wiltshire finishing whenever you like. Based on the condition of the lanes last year I'm going to class this as a Non Scratchy trip, as far...

My son has a military bumper on the front of his Ninety, where the centre pin goes in the back of the bumper is flat. Seen one where the back of the bumper is round and deeper as if for a bigger towing/trailer eye, what are these bumpers for? The standard front panel on the Defender would get in...

My alarm went off the other night for no reason, the indicators flashed and horn ommitted a continuous tone for about 10secs. The BBUS didn't sound at all. Should the alarm be a beep beep beep rather than a bèeeeeeeeeeeeppppppp ? Sure it was when I tested it once before? Also can I check the...

Don't usually bother, feel the need, to let some air out when we go laning, mainly because the ground is pretty easy going. We are intending to go to the Peak District in the next couple of weeks and some of the lanes look quite rocky. Was wondering if it would be beneficial to let a bit of air...

Probably sounds a bit strange but my 02 TD5 has not discernable clutch bite point. This is fine when driving in general is concerned but a hill start is almost impossible to achieve, this could become an issue when in a situation where you don't want to risk rolling backwards. I have an older...

Faffing around with the front head lining in the Ninety before recovering it later in the year. Would there be any benefit giving it a coat of pva solution in the meantime? Reason is I have 5 litre of the stuff hanging around and trying to find something to use it on.

02 TD5 is there a bearing somewhere in the swivel/ stub axle? Looking from the back of it I can see the seal for the half shaft but you can rattle the halfshaft around willy nilly. Apart from the wheel bearings is there another bearing or does the halfshaft get held it place by the diff and just...

What's the difference between early 110 rear pads SFP000280 and later pads SFP000250? Are the later ones thicker, as in depth of friction material and the calipers wider?

Ok, so we only drove 1 byway and 1 UCR but it still counts as a green lane trip. Unbelievable that the weather was all in one day, the upside of a poor weather forecast is that you don't have to contend with cyclists proving themselves by going up the steepest road they can find! Usual poor...

What do other people do with the stupid axle breather on a TD5, glue them in?

Having changed the intermediate shaft o-ring a while back successfully I need to turn my attention to another leak. My next port of call is the sump gasket, it has one of them extended sumps rather than the flat plate. To be honest I'm having trouble actually locating the leak and as sump gasket...

Anyone else have a problem with these seals? Fitted an "OEM" seal which lasted 100 miles or so. I say oem as the supplier could not and would not tell me the manufacturer name, got a refund. Bought two NAK seals, these were VERY difficult to fit and seem to be slightly oversize to the point of...

The rear drive flange bolts have thread lock rather than a spring washer, any reason I shouldn't fit a spring washer? 02 TD5 90

Stake nut which holds the bearing in place, what size socket is it? I know earlier ones with the twin nut is 52mm, is the later one the same size? Thanks in advance.

2004 D2 TD5 . Had to take front half shaft and bearing out in one unit today, left the sensor on the hub and unplugged the loom at the other end. Now have a ABS (only) light on, when I did the other side it logged a dtc but not on the dash. Got fed up with Land Rovers for one day so haven't...

Anybody had experience changing the front calipers on a D2. £50 specials ok or is oem recommended at £170 each? Thanks in advance. Two different types pre and post 2002? Or just different part numbers for same item? Paddocks list one fits all STC1916 osf or is SEG000030 actually different?

Does anyone fit a spacer behind the lift pump on the 200tdi? Like this one https://fourby.co.uk/Tdi-Fuel-pump-Spacer Bought one a few years back for a couple of quid but never fitted it, does it make any difference to anything?