Search results

Did you find a fix. I have also opened up a old one and wondered what would be the effect of bonding/ glueing the valves in an open or closed position.A small loss of torque or economy ? Any thoughts

thanks for all the replies. I have sorted it. The window was jamming on the wiring on its way down so not falling to its full extent. When I rectified this by repositioning the wiring and fine tuning the window runners to give more clearance, it calibrated fine. Someone had obviously played...

Cheers I will give that a try.

Help please. My tailgate window will not recalibrate. I have followed all the instuctions. However when I raise the window it goes to the top, beeps and then just goes back down, I have searched the forum and found several threads on recalibration and followed the instructions but they do not...

Thanks for the suggestions chaps. I have located the proble. It was the large diodefuse in the engine fusebox.

I have put a 12v test bulb between the solenoid lead and the battery earth and it lights when the ignition is turned. I presume it switches the earth. guess that this means its not the immobiliser. I can hear the relay switching. I take it that this means it must be the starter or the solenoid...

I have a 2000 v6 lpgd freelander. The fans do not seem to be coming on and it recently overheated. I believe the headgaskets are ok. I have just fitted a new thermostat and temp sender. Having put everything back in place ( the car was in the garage some three weeks )it will not turn over...

Front n/s window on my 2001 freelander goes down but does not want to come up. Did it once before and helping it slightly fixed the problem. However a couple of days later went down again but wont go back up. Slight hum when switch is pressed. Had a look but there is nothing obviosly wrong. All...

quote=ianda12;584018]The software installed in the freelander drives the VIS valves too far causing the ball joints on the links to wear and break. This allows the valves to flap around and rattle. The rover 75 V6 had different software that didn't try to move the valves past the end stops. The...

Hi I have read the previous threads re the manifold rattle. Apparently [email protected] knows a cheap cure. Has anyone else got the info as I have been unable to contact him. Also will the A151 recall fix future problems. My local dealer says no and will charge me £50 for doing the...