Search results

Thanks jamesDiscoTD. Checked on another forum and says the same as yourself. Band K and the important bit about being registered before 23rd March 2006. Teach me to jump the gun without researching fully.

Shouldn't highjack the thread but according to yesterday's Express, for my Disco 2 it will be around £750 year. From the Express:- "Owners of older models registered on or after March 1, 2001, will also be slapped with higher charges.Those with the most polluting models producing Over 255 g/km...

I had a similar problem with water in roughly the same place. Brought forward the headliner re-cloth and re-sealed both sunroofs and roof bar gaskets......and first time it rained the headlining around the top of the passenger side "A" pillar got soaked. Gutted to say the least. But checked out...

Gooday 02Disco2....share your pain. Had a No Start several months ago...mine started out with being locked out of car...Then turned key and nothing except for chimes....then it would start with no probs. Found I think Fuse 13 (10A) blown that was a feed for BCU.......Advised to replace interior...

Gooday Kev. Memory going in my old age.....twas Ebay. Hopefully this will take you to the site...( https://www.ebay.co.uk/itm/153428347866?). If not search ( US PRO 5pc Blind Inner Bearing Puller set Slide Hammer Internal 5148 ). Got the 3 bearings and centering bearing kit from JGS 4X4.

Gooday Chazb5046. I was passing parked cars and heard a "clonking" noise when touching the accelerator / brake. Got under and grabbed the front propshaft and "twisted" back and forth and there was visibly a lot of free play in the joint with the flanges stationary. You could also hear the...

Gooday MJI.....feel your pain. Humiliated at MOT station when they failed mine. Never seen so much yellow chalk under my car. What I could see was bad....but the inside rails which is hidden by fuel tank was scary. Can recommend RAC chassis at Birdingbury. They replaced my half chassis for £1500...

Thanks for your input tilly2. In a masochistic way i'm excited to get problems on the D2. Had a Beemer up until I retired and even changing oil was a major job....mainly trying to get under it!! Spark plugs a few hours. The fault I had seems to be covered on forum......possible fuse box. Bit of...

Gooday all. Fortunately I have been able to cure my fuse blowing. Thought I would use some electrical solvent cleaner on my fuse board as unable to purchase a replacement until after break. Replaced fuse board / BCU carefully into car and attempted to start car. F13 blew as before. Replaced fuse...

Gooday Sierrafery. Glad you replied. Can I run this pass you. The F13 fuse is live and not energised by ignition switch. Being that as far as I could tell alarm system,windows,central locking, etc all came back to life and only blew F13 when I tried to start. The starter motor just started to...

Gooday all. Hadn't drove my 2003 D2 TD5 for a week and when I went to start it couldn't get in. No red flashing led. Opened with key and tried to start and got split B icon,M&S lights flashing,etc. Checked up on LZ forum and quickly found that engine bay fuse F13 blown. Replaced and back to...

Gooday all. Thanks for your replies. Helped me understand my drive system. Have been guilty of just thinking the diff speeds up or down inner and outer wheels by magic and have never fully understood the working of the diff. It just does the job. I have now more understanding due to your replies...

Thanks for your prompt replies. The front wheels do turn opposite ways together when jacked up. Tomorrow I will jack one side up and see if that wheel drives the prop shaft. Thought that as diff is mechanically locked the output to transfer box is always connected. Should have paid more...

Gooday all. Could not find anything on search but have a problem with my 2003 TD5. Changed my front prop shaft bearings a couple of weeks ago and thought I would have a visual just for peace of mind. Somehow I ended up turning the front wheels in Park whilst on stands. Both front wheels turn in...