Search results

Brake discs are good, I replaced them about 2 years ago

hmmm, I had looked all over the country and never found any quotes less than £2500. Are you sure they are replacing all the internals components? solenoids and most importantly you must get a new gearbox filter system as the broken up failed parts will be clogging it.

Hi there, I checked the rear brakes, they don't look to be dragging or getting hot, noise is not at the back though, but front. I stuck my GoPro underneath but you can't really pick up much.

Do you have the BMW 3L engine, with the GM gearbox made from cardboard !?\ Sorry bro its the one Achilles heal to these cars, I had 140K miles and had to get a new gearbox, well they call it new, but complete strip down and new internal parts, cost was £3500.

Hi there, I asked of the car had been driven as this is the only time you can hear the pulsating noise, but they said they were going to drive the car because it had partial wear on one tyre and worn wiper blade. They tyre was still legal abeit on the outer edge was worn but no ribbons showing...

The wear on the tyre was still legal, in the UK it states 3/4 of the tyre must have legal tread, the car had an MOT, there were no ribbons showing on the tyre, just the outer edge was showing signs wear due to alignment. I swapped both front wheels with spare wheels I had, the noise remained. I...

oh do not worry there is nothing derogatory at all. The information is fact about Elite Land Rover in Clydbank, I am trying to help others avoiding being scammed as it was blatant theft and dishonesty, the review is going on TrustPilot, I have no concerns of posting !

I took my car to "Elite Range Rover" in Clydebank, South Douglas Street, however I was scammed as they charged me £110 inspection and didn't even take it for a test drive ! My issue was a pulsating noise, perhaps a wheel bearing, or drive shaft, so wanted them to diagnose and advise me what the...

Thanks for the advise, I will go to trust pilot. For my car I do not believe its a bearing as checking each side I do nto feel any play, but could be wrong. Is the CV joint spring easy to check and fix do you know?

I am really sorry should have said, its an L322 3L Diesel year 2004.

Sorry i meant to say that I took it to them to investigate a pulsating noise from the front perhaps a wheel bearing or drive shaft.

I live in Glasgow and took it to a garage that are supposed to be experts in Range Rover called "Elite Range Rover" in Clydebank, South Douglas Street, however I was scammed as they charged me £110 inspection and didn't even take it for a test drive ! My issue was a pulsating noise, perhaps a...

Hi all I have a pulsating noise that seems to be in the front, that I am trying to diagnose on my L322 3L Diesel year 2004. I live in Glasgow and took it to a garage that are susposed to be experts in Range Rover called "Elite Range Rover" in Clydebank, South Douglas Street, however I was...

This is for a L320 that may help

Thanks so much for the recommendation on swapping out the tyre, I will try that this weekend and see if I can also see any play o the bearing, Stay posted !

Hi All 2004 Range Rover L322 V6 Diesel. I have a drone pulsation that I can hear and feel from my front right at low speeds, the tyre shows signs of wear so I thought it must be a wheel bearing. However I took it to my local garage who did not think it was a wheel bearing and advised I take...

Have you checked that your display is going to sleep after 16 minutes and that the red LED at your gear shift extinguishes? Here's a video I did that may help, turned out to be the heater resistor needed changing.

I've had this same issue, and as others have said it sounds like the solenoids! The majority of the car is BMW with the exception of the crap gearbox made by GM. The good news is you can get the gearbox overhauled, bad news is it will cost as much as the car. I just had mine done and it was...

I have just replaced the seal in the compressor, I decided to film it to help others, its not that hard just play and pause my video to help you:

Thanks for the reply, my thoughts are the angle sensor too, as the pump works well, the car does not sag, and ABS values on each corner look consistent. Now I can see and touch the angle sensor, but how hard are they to remove/ replace, I did find a good post on this forum to follow. Also If I...