Search results

Hi folks- more help needed! I’ve swapped the master unit, but now different problems! No rear brakes although I’ve fluid at both callipers. BUT, can anyone please share either a photo if their unit (92 EFI), specifically which pipes connect to the accumulator, or a more detailed view of pipe...

RRC ABS details

Many thanks folks for all your support with this! I’ve ordered new relays, and have sourced a new brake master unit... I’m in this car for the long term and everything I’ve spent, might as well get it to the best I can... awaiting delivery of goods and will advise where I get to! Truly...

Seeking help; Background - no ABS! After some restoration, and brake pipes/calipers/discs/ hoses replacement, unable to get ANY brake fluid out of the Master Cylinder on the ABS side. Have troubleshooted as follows: - Replaced ABS pump. - Have bleed as per RAVE, noting no brake fluid on ABS...

...oh, and have removed the ABS relay, but cannot find the 4pin socket for bridging the ABS...anyone point me to what that looks like and where it should be?

Folks - not made any progress so have resulted in disconnecting all lines from the brake master cylinder; and still have little brake pedal travel, certainly would have expected lots of travel and wholly feeling! Have run pump (certainly now quiet). No excess of fluid coming from the master...

Diagnostic kit? damn - is this a specialist tooling system as the car is up on jacks with no brakes? I appreciate the advise BTW from you all as this is highly frustrating, I allowed the brake fluid to completely drain from the reservoir as I also changed the flex hoses and rear brake pipes. The...

Help! I’ve replaced front discs, callipers, hoses and pads, yet have multiple issues! I’m unable to get any brake fluid out of each calliper! I’ve followed the bleed instructions, but have Numerous issues: 1) I cannot get any fluid out of cct 1 and 2, I’ve used a pressure bleed system; I’m...

Folks - first and foremost Thankyou for all your advice! Poor connector on the new pump, the wiring from the pump to the loom, the new connector in the pump housing had not sat properly into the pump connector! Hours of trawling and metering and swapping relays, but then testing noticed the...

I’ve intercepted the flow line at both the water filter and at the injection head, no fuel. Equally taken off the fuel line at the pump source under the rear floor, no fuel. Hence unsure how to validate test the pump isn’t faulty. There are 3 lines in the loom plus and Earth to the pump head...

Hoping here I can find a solution! ive a 92 EFi RRC, these past 2 years completed near a full rebuild. Problem being getting no fuel out of the fuel pump, which is new. I energised the car today but no fuel from pump? I’m getting 4.7 volts on the loom at the pump which I think is the gauge...