Search results

So I'm getting near to the end with my land rover finally! After renewing the whole braking system I decided to purchase a vaccum pump to ease bleeding, I found I only had to crack the bleeder valve 1/4 of a turn and no more otherwise air entered through the threads. Upon trying the brakes I...

So I finished rebuilding and painting the fairey freewheeling hub, found this bit at the bottom of the bag as it was disassembled, does this go inside it? Looks just like a castle pinion nut

So after removing and replacing the pads I trimmed down ( doh) I am back to this situation. All pipes have been replaced, all cylinders. Pads springs and drums. Wheel adjusters are on the lowest setting. System was bled + new fluid. Pedal seemed very hard/very little travel. Was binding...

So today I removed the proper shaft and old transmission drum and internals. Cleaned everything necessary and installed new gaskets and oil seal. New pads and drum. Now the old pads were filthy and covered in oil and I have had an oil leak coming from somewhere... This could be it. The Haynes...

So after three weeks of order the wrong size bolts for the master cylinder...turns out they are imperial. I bled the brakes today and upon trying out the brakes the pedal is really hard, it moves down maybe an inch or two with giving it some welly. The brakes work so in comparison to last time...

hey guys, hope you are all well. Progress on my land rover has come on massive amounts the last few weeks. All rust. Proofing, welding, priming and painting done on the chassis. Runs sweet ass a nut minus the oil drip. I have spent the last 3 days over hauling the brake system, new pads, drums...

Hello guys, I've just got my first land rover. The poor girl needs some love and attention so i flushed the engine, refilled with fresh oil, cleaned out sump, fresh diesel filter, rebuilt starter motor, new air filter and oil. Battery has 12.50 volts and charged. Also in the process of doing...