Search results

Hello everyone, has anyone ever come up with a mod to get around that stupid drop down rear window on the freelander one facelift? I don't care what it looks like i just want a get around so I can do away with that stupid drop down bit. it was a bit iffy sometimes and then when the mech broke...

Yes, people do disable the egr for other reasons, but I've never heard of anybody actually finding a solution to the problem I was having, I suppose unfortunately you do get a lot of people who'll come on forums asking for help, but when they do get a solution they never come back. which is why...

Hi everyone, I posted a while ago about the freelander running rough below 2000 rpm, dis the maf and it runs fine, remember it? Well, there's a few had the issue and nobody seems to have found the solution, well I have and it's nothing to do with the maf, its the egr solenoid! I reconnected the...

I've been doing a load of reading today and have found an article that stated a sticking turbo will cause a similar issue, so I think it's up on the ramp and drop the turbo, I've read that it's not that difficult to do, and since it's the cheaper option in terms of parts, I'm going to give it a...

ok here we go, a little over a year ago I bought a freelander td4 05 facelift, ok it had a few minor issues, but nothing that put me off, about a week later I had it in the garage at work to do a full service, including that little filter on top of the engine, can't remember what it's called but...

No it was an aftermarket one from fleabay, I didn't fancy paying well over a ton for one, what gets me is why do they sell them if they don't work? there wasn't any bad reviews on them which I find strange.

Yes, that's what I was thinking, more likely to be corrosion on the connector than actual loom failure, we get the same thing on some of the stuff at work (industrial & railway spark) I've had a supplier of connectors recommended to me so I think I'll give them a bell tomorrow and see if I can...

I,ve done a bit more reading and I'm thinking there were 2 faults, yes that sensor I replaced was faulty, because the fault now is different to the original fault, and after doing a bit of research I'm starting to suspect the loom between the hp fuel sensor and the ecm. what brought me to this...

Hi, everyone, I wonder if anyone can help me, my 2005 diesel freelander td4 has done around 70k and I've owned it for a year now. When I bought it it ran fine apart from a slight rattle (pinking) at low revs, anyway I bought all the bits and serviced it and noticed the plug on the sensor at the...