Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. C

    discovery 1 3.9 spider box

    Hello I have a 3.9 v8 1996 left hand drive. will the spider immobiliser box be behind the radio on this year ? Thanks Chris
  2. C

    3.9 v8 efi ignition amplifier

    Hello i have a discovery 1 3.9 v8 1996. Would this have the 2 pin or 3 pin ignition amplifier ? Thanks chris
  3. C

    Discovery 1 3.9 v8

    Hello i have a discovery 1 3.9 v8 1996. Would this have the 2 pin or 3 pin ignition amplifier ? Thanks chris
  4. C

    3.9 v8 efi 1996 discovery 1

    Hello I have a 3.9v8 discovery 1 efi. there is a intermittent fault of the vehicle cutting out mainly when coming off the power/ idle. I have replaced the stepper motor on the back of the plenum but the issue is still present. does the base idle need re setting up after replacing this? I have...
  5. C

    vacuum hose for 3.9 v8 efi

    Hello Does anyone know the internal diameter of the vac hose I need to buy for my 3.9 v8. I would check on the car but its currently in Spain. Many thanks Chris
  6. C

    Discovery 1 3.9v8

    Hello I have a discovery 1 v8 3.9 auto. I have a problem where when driving the revs drop to around 500 rpm at trafgic lights. Intermitantly it will cut out and sruggle to restart. Once running it runs fine again. Any ideas ? I have put a aftermarket idle air control valve on it are these much...
  7. C

    Range Rover p38 subwoofer issue

    Hello I have a 2001 Range rover recently the subwoofer has started making a distorted horrible noise when the bass kicks in to get round this i have had to turn it down on the head unit which indicates this been faulty. The part number of the sub is XQA100070 they are £500 new and a bit wary...
  8. C

    P38 rear wiper issue

    Good evening i have a p38 and recently the rear wiper has stopped working. Checked all of the wiring and got no power coming out of the becm looks like a internal failure. Has anyone else had this ? Is there anyway i can wire a relay in to bypass the becm Thanks chris
Back
Top