Search results

Can anyone recommend where to get the vent seals, I think defender seals are available, but I have seen where you cant close the vent because the seal is too thick, This is for my 1967 109 2a. I got some many years ago from Brockwell's just up the road but they just sell land rovers now no...

Hi guys. I’m fitting the front floor plates to my series 2a and the screws I have seem a bit short these are 320045. I’m sure there are some longer screws, can anyone please help? Thanks all, regards Billy.

As title says, Can the sump oil cooler connector be replaced with a sump drain bolt? And remove the oil cooler pipe adaptor from the oil filter. Does the oil cooler have a thermostat in the oil circuit (series 2a, 1967, FFR.). Are the pipe threads unf of pipe standard pipe thread. Thank you.

my 109, n/s front of the rear spring outrigger, where it connects to the front of the rear spring is very rusty, and not giving much strength to the front of the spring, I am in Hampshire, can any of you guys recommend a place that knows land rovers where I can take it to get it repaired??

I have been rebuilding my gearbox, the 3rd and 4th synchro gear teeth are badly bruised. The synchro is a suffix "c" but the rest of the gears are suffix "d", I think the waisted teeth on the pinion may have done this damage, but I'm not sure, any ideas. And also are selectors for suffix "c"...

Rebuilding the gearbox on my series 2a. The synchronising clutch, I didn't take much notice when I took it out but the teeth on either side are different on one side they look quite worn, and on the other side thicker and looking better?? Does it matter which way it goes back, any idea's. I will...

my land rover is 88 with a transit 2.5 diesel engine. I busted the gearbox, I do have another 2 gearboxes and one of them I will use to keep me on the road. One of the boxes is a series 3 1ton box in good condition, the other box, well I don't know what year it is the number on it is 146002817...

Hi all, I've just brought a series 2a with a diesel engine 15J, I cannot find any information regarding changing over from diesel to petrol. Can anyone tell me if there is a petrol cylinder head and accessories that I can fit to use petrol. Sorry but this diesel I have is smelly and very noisy...

Hi all, I've just brought a series 2a with a diesel engine no; 15J, I cannot find any information regarding changing over from diesel to petrol ( nothing wrong with diesel but I have all ways had and worked on petrol vehicles). I have been told the block from the diesel is the same used for...