Search results

Hi p38 4.6 Gems engine does anybody know what "invalid throttle angle data" means I have it as a gearbox fault on my nanocom Any ideas would be appreciated Thanks

Hi all Today whilst driving home from work car started to shudder,stall,pulled over to see what was going on but then decided to find a better spot (safer) put into drive nothing happened except for rev counter moved Went through the gears still nothing tried again and it engaged anyhow pulled...

hi does anybody know what part number the bolts that secure the ram housing to the intake manifold are have snapped 2 off managed to get them out ok but need new ones obviously any ideas would be great Thanks

Hi again I have been brought back home off the M4 today as I was just poodling along car lost all power started acting like a misfire have checked on nanocom and I have p1202 short to ground and p0202 injector circuit malfunction but at the same time short term fuel trim on bank 2 is not moving...

Hi can anybody point me in the right direction wifes 2.5 dse drives fine up until she hits 50mph then the car seems to have a dead spot it will accelerate but it crawls until it hits 60mph then it is fine again until she brakes below 50 and then it all starts over again could it be the turbo...

Hi I'm looking for some parts info if anybody can help I have broken one of the arms off of the the clamp that holds the engine oil hoses into the filter housing the part I need is ESR 1502 which became STC2305 Does anyone know where they can be gotten from as I have tried britpart lrdirect and...

Hi all am going to be replacing the hoses on my DSE as both leaking badly and possibly the rad if they end up stripping the thread just a quick question do I need to drain the transmission fluid first or is it jus the amount in the radiator and the hoses that will come out many thanks in advance

Hi have a strange one for you the cars EAS was playing up again with a soft fault tried everything to no avail so crawled under to check the sensors out which were fairly new (britpart) I know !! Any hoo both sensors were snapped where they bolt onto the chassis and were literally just sitting...

Ok well EAS will work fine for weeks and then all warnings come on and the lights go solid can't do anything with it put nanocom on and as soon as connected with EAS without clearing any faults car goes back to normal for another few days or weeks fault that is coming up is rhf height sensor out...

Hi Fixed all leaks from valve block eas working ok Ish get soft fault now and again but when going through the height profiles I can get access Highway Standard but it is struggling with High just won't go there is the pump dying do you think Thanks for any help offered

Right so have obviously been an idiot and overtightened the compressor nut on the single post at the front that attaches behind the drive pack and the bolt has come loose does anybody know if you can get this replaced or a way to fix it please the cab vibration is driving me mad any ideas are...

hi does anybody know why when I put the eas unlock on and get good idle as soon as I read faults I get faults but it loses good idle everything else is fine can get heights adjust heights everything until I try to read faults then I lose the FF in the buffer and just have numbers could it be a...

Hi all Ok I'm am officially flummoxed redid piston and seal on compressor all works great checking for air escaping from valve block outlet all good check the inlet filter bloody thing is blowing air not sucking air into the compressor what the heck have I done wrong cos I have no idea right now...

Hi Nanocom does not seem to want to change the heights when commanded to goes through the process on the screen but nothing moves any ideas anyone thanks in advance

Hi All I have checked the eas for leaks both valve block and compressor with the soapy water have had the new o rings installed and that is not leaking still getting Faults saying R/F sensor out of Range could this be the driver Pack and if so Is the part No ANR3900 the right part for a 1997 MY...

Hi I thinks I need to redo the o rings in the valve block but I need the car for work I have the Schrader valves for emergency but my question is is it possible to manually inflate the bags with Schrader valves then remove the valve block to do the repair of an evening or will this cause a...

hi all I know that we take measurements from centre of wheel to centre lip of wheel arch and let's say it is 428mm but what does nanocom measure it in and how does that correspond with the heights of measured values any help is appreciated as I am very confused by this and need to calibrate...

Hi does anybody know how the clip retaining pin for the handle attaches to stop the handle being pulled away from the the body everything else is tight and the handle still pulls out on the handle part number diagrams it show a clip retaing pin labeled number 5 in picture that seems to attach to...

Hi Just a quick ask really !! Does anybody know where I can get the front sidelight bulb holder for the p38 ? I have tried all the usual places online but it says it is obsolete just thought you guys might have a better idea Tried sorting a bad connection found it was corroded and one of the...

hi I have a problem with what I think is the n/s wheel hub I had to change the split boot on that side and when everything was out I tried the wheelhub for grating but it seemed to be OK everything put back now I have a squeaking noise when not under load only on acceleration no noise when going...