Freelander 1 Door card fabric replacement

anubis757 said:

Well the spray is very precise out of the can ...but do you see the tape around is just to prevent go out of the desire place.
On the fabric you can spray over a table and then clean it once its dry.
As long two half's don't go together the glues gets out fairly easy

Click to expand...

Markysparky2014 said:

Cheers,I will buy tomorrow glue then hopefully next week the adventure begins

Click to expand...

Jayridium said:

As a general rule of thumb with these bulbs, the bluer the glass is, the whiter, and thus perceptually brighter the light is. So you are looking for something like:

https://www.ebay.co.uk/itm/H7-H4-H1...583992?hash=item1ef57c50f8:g:xn8AAOSwAn9c1Mt3
Which is seven quid for a pair of blue tinted H4 100w bulbs from a UK seller. If you wait on Chinese sellers you can get a pair of very similar bulbs for about two and a half quid:
https://www.ebay.co.uk/itm/H4-100w-...700148?hash=item48d83076f4:g:0s4AAOSwhVVd3yHU

Click to expand...

Markysparky2014 said:

Cheers,I will buy tomorrow glue then hopefully next week the adventure begins

Click to expand...

anubis757 said:

DOORS DONE!!!!

Click to expand...

freespaña said:

Very great job!!!!
seen your great job I will change my fabrics for leather in conjunction with the rest of the car.
Thanks to teach how it´s made.

Click to expand...

anubis757 said:

I've used one of the plastic tools for car trim to push the fabric in and then you can use electric wire to make it look better, if you use a screw driver you will rip the vinyl. and always cut a bit bigger than the mold. because those where install there using vacuum.
Marksparky your doors are great.

Click to expand...

Markysparky2014 said:

Hi,what electric wire did you use to finish off

Click to expand...

anubis757 said:

Sorry for late reply.
I used 3mm. In my case brown wire

Click to expand...