you will find that when you strip it the chassis will collapse in the centre so be careful how you support it my series 1 chassis ended up in the pile shown and the rest in the vacuum cleaner
Thank you. Is there a certain paint to use or any chassis paint? Lanoguard I checked their reviews and people seem to be happy with it.appreciate you helping me out.
Think you would be better off painting the chassis, then spray inside with a cavity wax of your choice.
Some people leave the chassis bare and don't paint it at all.
Certain process to follow when painting a galv chassis.
I have never used...
Hello @Anaconda if it’s ok I got another question for you….when I do get a Maer galvanized chassis, I brought some of the Lanoguard for the chassis that is no good, should I spray the inside of the new chassis? I was also going to cover the...
On my second go I riveted the cross members to floor and they sit on the chassis top on rubber cushions.
The U slots are to fix the door threshold , 2 pieces one shown in pic the other piece I need to change , prob go to yrm for that
You don’t...
You done a very nice job that looks so neat underneath the floor. The 3 cross members are they bolted onto the chassis or onto the edge of the tub? I haven’t got any problems with the lip around my tub. What are the U slots for? Where them U...
I’m not sure if the floor is original as I have taken all 3 top hats off and they have all been riveted on, I thought that was the way to go. I haven’t got the knowledge to weld them.
Nice one for this. I wish I had the room to work on my truck but I have only a single garage. I have seen videos of rear tub removal but not many show replacing the floor.
Afternoon sir, I have got the 3 top hats and the cross member supports to put on the rear tub floor, do I put the top hats onto the floor first before I put floor back onto the tub? I have got the countersunk rivets from YRM. I just got to get...
Can someone please tell me what size countersunk pop rivets I need for putting the 3 top hats on the underside of tub floor and the sides of the floor?
If you grab a copy of LRM they put all the spares day & camping event dates in there or look on their website & sign up for emails & they send you details/reminders of up & coming events.
Hi, I've been looking for about 3 yrs now & couldn't believe my luck £10 for the lamps ( the same for the arms). I had one reflector that was shot when I got my D2 so at last I can make a good set. I think any 7" H1 reflector/lens will fit the...
No worries. lol seen as you have already done your series is there any Parts or Nuts n Bolts that I should replace before attaching onto the new chassis?
Been checking over the front chassis and it has had quite a lot of welding mainly at the very front both sides of where the leaf springs attach to. So I have taken on board what you have been saying to me about a Maer chassis! Is the Maer the...
https://www.ebay.co.uk/itm/294300589664
You can also get the centre cross member for another £150.
It's only worth doing if the front end is good and there is solid metal to weld to.
You will also need to be confident in your welding abilities or...
Not much to weld to, at the least it needs some repair sections welded in, like a half chassis. Even then there doesn't look like much to weld that to.
It is hard to tell with photos but in general rust is always worse than it first looks.
Of...
That is what I have been doing for last 5yrs apart from replacing front wings and doors I have done everything else. I have done other posts on here about trouble I’m having with the electrics they have spanked me big time lol I just can’t get my...