Nice job, I still believe there is a place for quality colour coded trim. My sons car gets regular thumbs up for matching in all the sad moulded black plastic. We’ll done.
Tricky :cool:
It's been a while since I last updated I had my mate do the front arb bushes for me in exchange for some paint correction to his little ulez purchase, I then replaced the lower steering column to finally sort out a minor steering issue.
Will be...
Hi @Rosie 67 your not alone, we all get this at some time. I know your model shares running gear with the Discovery of that year so you could ask the question in that forum but in the meantime, check that the compressor runs up when you start the...
Take a load of pictures, post them online (here if allowed, or ebay, or autotrader) to get the biggest potential audience.
Be truthful about the dodgy bits as well as the good bits.
If you Can't get an MoT without spending any money, then you...
First welcome :) though I guess you wont be around long🤔.
Get new pads in and get an MOT, be honest about the rust, but without seeing it they can be quite extensive repairs, but a 2008 already rotting out is a bit worrying.
plenty of guys will...
please dont shoot me or send me to the asylum
i miss the p38, the sound of that v8, i even miss the reassuring BEEP and the soft ride the L322 doesnt have
:vb-bouncy::vb-bouncy2::vb-bouncy3::stars:
The backing plates can be / are changed without removing the hub quite easily if you're handy with MIG/TIG welding.
The adjustment process is this:- (slightly different from the one published on Topix but the way it is done in most dealerships.)...
Dehumidifier out, trickle off, tools and tarp in the back. 50 mile comfortable waft to the garden centre for lunch, then back via the BILs (to dig out two saplings) and the fuel station.
Just under 21 mpg tankful including east London for...
Been in it all week since selling the mini and berlingo van,
Wednesday I got a volvo xc90 so went with trailer for that
Were heading down too 3 sisters in wigan on Friday night, then down too Windsor for a couple of days then back up the road...
Replaced front rear suspension arms ('spring links') due to inner bush wear - NS one had deteriorated due to the engine oil cooler leak being left to, well, leak, for some time and the OS one was showing its age. The downside was finding oil down...
Tret mine to a new grill. Picked up an old one the other day and then retired to the shed. Rubbed it down, primed it, sprayed it and lacquered it. Taken about 3 days in all and just fitted it.
Hi, I like the advice about shoe adjustment as mine are scraping slightly just now but I also have a binding calliper piston to deal with. However, I did have a problem with the shoe holding pin that came loose and sounded like a stone trapped in...
My next step is to use one of these. Put in each fuse in turn and do sleep test. Long process but hopefully will locate the problem.
Shows the actual current being drawn.
No need to be sorry. . . . car is at home & I have all the required tooks & diag stuff. Will write up the details so others can benefit.
Just need to refill my Guinness glass now.
Not quite Mark. I will not be beaten. Must be something simple because it's only 0.5A and used to be << 50mA. Cannot be heated seats cos they are both open circuit !!
One strange thing in Nanocom is "door ajar" in BECM inputs doesn't seem...
My son Elliott is going through a parasitic drain, after three/four days it'll drain then battery. He's disconnected the heated seats as they are burnt out.... We've been through a couple of avenues but still there is something...
Set fire to...
Well, I've been for a drive. Something has reset somewhere.
The heater actually worked on auto. Properly!! It's never done this before even when it's 'worked' in the past. Once it started to warm up after a couple of mins, the fan went up to max...