Recent content by steven.k
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
S
hi all i have tried looking on the threads for info but got limitid info(maybe looking in the wrong direction)
Ive got Discovery 2 with 2inch sus lift and maybe another 2inch with my tyres.
Just wondering if i will have to drop my towball height for towing carvan/trailer and if so can i get an...
-
S
Was going to go for +25 offset so hopefully that should stop the rubbing as been told the origanls are +57
-
S
Im defo going for a 2inch lift i dont plan on going mad lol tyres you mentiond same width i wasnt sure if i needed slightly wider a lot of people have mentioned 265/75/16 on 8jx16 modulars but when ive rang to get prices some people have said put them on 7jx16 modulars as there better suited...
-
S
Great advice mate . Had a look turns out i got unlucky and dont have diff mech looking to source 1 and a linkage hear its a bit of a messy job but i work on hgv anyway so shouldnt be an issue
-
S
Okey i seem to be get the vibe of just stick some good tyres on it is it worth getting some steels instead of the alloys and what size tyre is best without chopping the car up still mite put some lift blocks on it just to satisfy my mind lol
-
S
Just been told will be better to post in here .
Been looking at terrafirma +2 springs and +2 shocks all round (FOR MY DISCO 2)
And also +2 springs and +3 shocks
With the +2spring +3shock combo im assuming i will need dislocation cones was hoping someone would beable to guide me a little better...
-
S
Ive done quite a bit but i would like to beable to go down a bit more than a bumpy gravel track also lots of the lanes near me are rutted like mad and people are getting stuck with 4inch lifts so would be looking to give myself a fighting chance and yes is on air still on the back end
-
-
S
Why not ? Is there a better alternative? Your reply didnt really help me
-
S
Hi was wondering will be having a 4inch lift on my disco 2
Im looking at some 8jx16 modulars steel wheels
I am of the understanding that standard d2 wheels are 7jX16 +et35 235/70/16 is currently fitted
So i am wondering what i would be able to put my tyre size 2 without spacers and chopping...
-
S
Been looking at terrafirma +2 springs and +2 shocks all round (FOR MY DISCO 2)
And also +2 springs and +3 shocks
With the +2spring +3shock combo im assuming i will need dislocation cones was hoping someone would beable to guide me a little better as im relativly new to all this and was wondering...
-
S
I had the oil in the loom ecu and fusebox already lol
-
S
thanks will look into them while im busy at work next week
-
S
Thanks i have googled seems to only give me the ebay option i just dont really trust ebay all that much lol
-
S
I here lots about people killing ecu due to going through deep water so would rather get that risk out the way first than have to pay for a new ecu and a loom extension