Recent content by Sambocar1988
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
S
I get extremely frustrated with garages charging what they like.
Gramma wise I'm dyslexic.
Never been able to spell properly so I rely on predictive text to correct me, it's not always right but near enough.
All done now MOT passed.
Thanks for the help all
Sam
-
S
Hi all
Thanks for the advice, I have sorted it it was the servo, all removed ready for the new one.
Thanks
Sam
-
S
I will have a search for the mentioned brand and look at bearmach, I'm not sure what a CP is but I have put my location in the profile. :D
Sam
-
S
Thanks for all your replys its been very helpful, I live near paddock spares so I tend to get everything from them, I have just found that video and almost shows from start to finish.
Again thank you and will post how I get on.
Sam
-
S
Thanks for that I will try it, is it a relatively easy job to replace?
-
S
Good Evening All
We have taken our 200tdi 90 for and MOT and it has failed on (break pedal has no servo assistance) they wanted to charge me 460 to replace the servo, I do all my own work on my motors but I have two questions.
1. How do they know it's the servo and not the vacuum pump and how...
-
S
Thanks for that guys I will leave it as is I have fitted the modified HG so we shall see how it goes
-
S
Sorry am I being a bit slow what do you mean best factory fitted engine I thought they where a bad engine. I was meaning could I put a td4 in or a V6
Thanks
-
S
Hi all
Just looking into this but my plan is when the head gasket goes again on my 1.8 petrol 2004 I'm going to put a better engine in it and wanted your guys opinion on which would be the best but the easiest to fit.
Thanks
-
S
Your motor looks really well mate. Are they actually good off road I am use to discos and defenders but my mum had the freelander 04 40000 miles and said I could have it for nothing I know its a 1800 petrol but for nothing you cant really grubble. I am rebuilding my 90 at the moment and was...
-
S
Is that with camber correction pins
-
-
S
I have fitted 225/75/16 and they scuff when people in the rear going over bumps will a 40mm lift be sufficient and will give a noticeable difference
-
S
Hi all I'm putting a 2" lift on my freelander do I need to put camber correction on or not and if so where do I get them from
Thanks
-
S
I have marix panther AT 225/75/16 they handle well both on and off road