Recent content by robbie123
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
R
I've got a similar problem on my '96 300 ES. I put key to pos.2 and get SRS and engine check lights on - with no other dash lights at all! It then starts and runs fine but I don't have speedo, rev.counter, temp. gauge or any other warning lights. Have checked all fuses but need to be able to...
-
R
This is first post I have found relating to my problem. Didn't get any replies to my posting a month ago. I have very similar problem on my 300 tdi. My hazards started lashing when disco was parked up. Used fob to switch on and off immobiliser and they stopped flashing. Since then no dash...
-
R
Have a strange one on my 96 300 tdi es auto. Was parked up whilst away with caravan unhitched. Noticed hazards flashing so used fob to set and then unset immobiliser, as it had done this before whilst towing. They then stopped. When I hitched up and left next day I noticed "engine check" light...
-
R
When I switch the ignition on I only get SRS and Engine Check warning lights come on. No temp gauge, speedo, rev.counter or other warning lights come on. Have tried switching immobiliser on and off but makes no difference. Lights and indicators work fine whilst driving though. It's a '96 300 tdi ES.
-
R
Had the same problem on my '96 300 tdi. Managed to change the lock without taking window frame out. Really awkward but a bit of brute force does get you enough clearance to slip the lock between window channel and inside of door panel. Haven't been able to get central locking working since...
-
R
Think I had similar problem on drivers door after I replaced lock. Would lock and unlock manually, but when I used central locking I couldn't open the door. Got round it by pushing up the lug inside the door with a screw driver. Identifiable by the fact that it has a spring attached to it that...
-
R
Thanks for that. Have tried it but to no avail as it seems to need more than a few mm. When linkages connected door won't open at all and have to lift pin from inside the door itself to open it! Now the tailgate won't open. Handle doesn't appear to have enough movement on it. It just doesn't...
-
R
Thanks for that. Have tried it but to no avail as it seems to need more than a few mm. When linkages connected door won't open at all and have to lift pin from inside the door itself to open it! Now the tailgate won't open. Handle doesn't appear to have enough movement on it. It just doesn't...
-
R
Drivers door on my '96 300 TDI wouldn't close. Replaced lock (pig of a job) but now central locking doesn't work properly. When I lock the drivers door from the inside, all doors lock then unlock immediately but drivers door stays locked. Luckily I haven't put door panel back on so I can still...
-
R
Drivers door on my '96 300 TDI wouldn't close. Replaced lock (pig of a job) but now central locking doesn't work properly. When I lock the drivers door from the inside, all doors lock then unlock immediately but drivers door stays locked. Luckily I haven't put door panel back on so I can still...