Recent content by redzulu

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. R

    Disco 1 Self destruction

    This happened on mine,was a couple of the bolts had come loose, just tightened them back up
  2. R

    Welding near Widnes?

    Give Dave at Definitely Tough Products a ring, he is at Kingsland Grange Warrington. Good welder and fabricator his number is 07505 100746.
  3. R

    rear wiper fault

    Don't know if D2s are like D1s, where you have to have the drivers door shut or the rear wiper will not work. Mate of mine spent hours taking the rear door apart and motor off and was pulling his hair out, when I said to him, you did have the drivers door shut did'nt youand he said no, shut the...
  4. R

    Are these standard disco calipers?

    Probably Defender 110s thats the usual upgrade on the front of Discos. I'am after a set for mine to give me more braking power for when I'am towing.
  5. R

    Some pics of my Disco :D

    If you just want bigger calipers and pads on the front you can use Defender 110 front calipers. Was talking to a guy at the weekend who had put them on his Disco, said as long as you have the calipers with just the 1 brake pipe on each side they are a straight swop.:o
  6. R

    Tool to remove steering knuckle ball joints

    Have a look at this clip this guy has some really good tips and tricks Land Rover Axle Stripping ....Some Cool Fitters Tricks... - YouTube :D
  7. R

    Discovering the Discovery... Basic Rebuild...

    Looks just the same as the ones you get in Aldi just a different name, and most of the stuff from there seems quite good.:crazy_driver:
  8. R

    Flatdog Wheel Arches

    I bought some 75mm flexi arches for my disco, then thought they would be a bit to wide, so swapped them for my mates 50mm ones as he had just fitted some bigger tyres. when we took the 50mm ones off and fitted the 75mm ones all the original screw holes lined up, so I would think it would work...
  9. R

    300 tdi fires and ticks over but will not rev???????

    Check the spill return pipes from the injectors, I had a similar problem and was told this could be the cause, these pipes can become very brittle and draw air into the system.
Back
Top