Recent content by propercornish

hi all, im new to the forum, and the landrover scene for that matter. just thought i would share a few pics of my new toy, a 1964 series 2 petrol. picked it up today, mot till end of october, £450! not a bad deal i thought. it needs tidying but drives/runs ok. even came with a hardtop as well...

hi, i have a 1995 N-reg disco 300tdi which i use for towing. it has done just over 117k. im starting to feel alot of slack in the transmission when changing gear or pulling away which i believe is due to the transfer box. there are no strange noises apart from clunking if rough letting clutch up...

what exactly is involved in blanking off the EGR? does it make much difference to performance? how do you do it?

i noticed a small difference when i done away with the cat but i didnt do it for perfomance really, just too tight to buy a new cat!!! sounds different to as its not so restrictive. still passed mot emissions test ok. as for the bf goodrich tyres i cant fault them. i think mine are the...

im from fraddon, u?

ive already uprated the springs and shocks, alloys with bf goodrich tyres and de-cat exhaust system. does doing away with the egr make much difference?

just thought i would let you all know in case you suffer the same problem. i unlocked the disco today with the key as the keyfob is still not working. opened the door and the alarm went off. as it was blowing a gale and pouring with rain i didnt want to work outside so i hot wired it and drove...

thanks for your help. i will look at the spider and get one of bypass thingys that plugs in instead. unfortunately i dont have the other keyfob. any ideas on stopping the alarm so that i can get in to change/repair the spider? the keyfob wont work and ive tried entering the 4 digit security code...

sorry if this has already been covered. i just joined the forum. i have a 1995/6 N-reg 300tdi discovery manual. ive been experiencing starting faults for a while now on and off and so ran a wire piggybacked on the starter solenoid back to the keyswitch start position. this allowed it to start...