Recent content by NorthSea92

Sorry, didn't read that bit. Check and see if the light is getting power with a multi meter, check the wiring.

A warning light for a blown bulb wont fail an mot and the tester will see that the light is working

With regards to the ABS light the tester gets a print out telling him this and any other special procedures he needs to follow and we've also got posters at the garage I work at telling us about abs lights

Two months ago I replaced both head gaskets and the thermostat. The water pump was fine so left that and the heads didn't need skimming. It was bled correctly, rad was hot all over too. It was fine for a few weeks and then started to get to hot again. Bled the system a second time and all...

Nice, I waiting for a bargain on a wooden gear lever and handbrake handle.

JHC100420 and JHB100920. Could that be the ones?

Or some heat, especially on the big buggers on wheel bearings

The first thing I done when I got my P38 home was take off the roof rails, I kept them in the garage and was going to sell them but then I saw a picture of an Epsom green P38 buffed to a mirror shine with roof rails and decided I would put them back on. That was a few months ago and I still...

I threw mine in the bin when I did my heads, finger slicing things to get out. If I was doing long trips I would just wrap my manifold in some special tape I have.

Tampons are good for sooking up the water too

I'm not long done doing the head gaskets on my 4.0, no prior warning of overheating, running fine and then one day it overheated severely and blew the left bank gasket. Done both heads, new plugs, leads and oil change for under 100 quid. Two weeks later she overheated again but I managed to...

My front one wouldn't stay closed, annoyed the **** out of me and spent ages trying to fix it then one day by chance whilst hoovering round about it decided to stay closed. I just blow all the stoor out now so that it wont open again.

I haven't got any diagnostics but I can recommend Mann Automotive in Laurencekirk. They are land rover specialists. Very reasonable

Do it yourself, its a piece a **** and a good way to learn

Check the spill pipes and stick a new filter on it too