Recent content by Mcgill84

Dan ,they all popped , but wasn't on superlock ,if that makes any difference.

Thank you Dan , much appreciated , I'm in .

Hello,... new dead battery discharged ,not been used.open driver's door ,tried to start ,grabbed jumping box, door/,bonnet open ,connected jump.box,activating central locking and wind blewdoor shut ........no valet key as I wouldn't have this problem .

2000 4.0 auto ....I've just LOCKED keys in motor . Keys in ignition ,jumping box on my brand new battery,wind blew door shut .Bonnet is OPEN . Can any nice person ,PM me , with the workaround to central locking , all the best .

Funny enough ,it's not bearing.silent smooth ... I'll take it apart on video , no burning , no change in tone ?? I need the motor, so had to stop poncing about , I also have some kind of warranty......

Ahhh HHhH one of them faults it was !!.. turns out I'm pumping 90 odd psi ,for around 15 seconds , then down to 15psi , .so stripped it down again , fitted the spare xj8 kit . no damage to ones I removed .Still same problem ... got nothing to test reed valves ,or the magnet ..... So I spent...

Imagine ALL the symptoms of a worn pump , with a disintegrated seals ........... but compressor blowing strong ...........I'll check the air dryer. I am right in thinking it's the next stop from compressor... Pwood you are correct , it actually went higher,I guess the heat ..soon as turned off ...

Hi all, ,During the last scorching day ,and sat in traffic over hour, I got the Xmas tree ,I was still up. Just run easunlock when get back . Before I ran it I noticed pump wasn't having none of it ( usual checks ) and bushes burnt out . 15 mins later all back together ,pumping great ,I'd done...

" That's funny " :)

I'm beginning to think that , probably over confident after getting the big ball joints out .. " I have a cunning plan " , , if I use the 4 hub bearing mounting holes to insert long bolts ,so when I tighten up ,they will push up against the hub itself , and magically push hub away, ..daft or...

Thanks Dan ,I'm actually trying to split bearing from hub , so I end up with this

Hi , I've searched and searched and keep coming up with a link that takes me nowhere... I'm changing ,or attempting to remove bearing from hub ....anyone got a working link on how to remove bearing ?.. many thanks .... By the way , the ring on left ,is that around edge of bearing ?

Any instructions to remove bearing in hub , , I've a press , is there clips ? .any help be great.. ,thank you . I really haven't a clue

New plan . Pull the lpg off , get garage to report all is well. ....and try again .

If anyone hears of a lpg 4.0 p38 getting a CoC . I was pondering whether to reapply log book ,withdrawing the lpg .? Then have another go . I've also posted a request ? The system probably don't work like that , but don't hurt to try.. They replied within 90 minutes . Nearest lpg station...