Recent content by martin41076

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. M

    Freelander 1 Two Amigos not solved after switch replacement

    Planning on stripping it down and figuring out what caused it, only got 83k on it. Just waiting for some warmer weather and lighter evenings.
  2. M

    Freelander 1 Two Amigos not solved after switch replacement

    Unfortunatley, my engine seized before I could solve it. Much bigger problem on my hands now 😬
  3. M

    Immobiliser error code issue

    Brilliant, do you know how I re write the dump file?
  4. M

    Immobiliser error code issue

    Sorry, can't seem to add video 🙄
  5. M

    Immobiliser error code issue

    Video for clarity.
  6. M

    Immobiliser error code issue

    Disconnected battery for 15 minutes and still no joy. Disconnected for an extended session, put battery on charge and connected + & - terminals in car together as read that this performed a reset? Connected it all back and nothing. I've read that these bmw immobilisers can be a bit of a nightmare. 🤬
  7. M

    Immobiliser error code issue

    Battery + battery tray removed before starting to give extra access to sm bolts.
  8. M

    Immobiliser error code issue

    Hi All I've just replaced battery and starter motor on my 55 plate TD4. Turned the key and nothing happened. Ran a scan and I got the following message: EWS Immobilisation malfunction (0x1DF5) Followed the handbook (5 presses on lock button to re-pair). Cleared the error code and tried again but...
  9. M

    TD4 non-starter

    Thanks all. I'll check around the starter tomorrow.
  10. M

    TD4 non-starter

    No crank, getting nothing. Sensors connected, checked connectors on glow plugs. Battery has 12.6v
  11. M

    TD4 non-starter

    Yes, but there were issues with 2 of them.
  12. M

    TD4 non-starter

    Hi All Changed glow plugs this weekend (pig of a job). Put everything back together and it won't turn over. Put the battery on charge, took everything apart to double check my work. Put it all back together and still nothing. Did a scan and it's throwing up: CAN message failures P1E00 Vehicle...
  13. M

    Engine bottom end

    To get it ready for MOT I've: Replaced propshaft bearings & universal joints New fuel pump & filter New brake light switch & abs sensors
  14. M

    Engine bottom end

    Hi All Took my 55 plate TD4 for MOT after 6 weeks off road since failing the last one. Fixed everything that it failed on last time. Got a call from the garage to say they abandoned MOT as they think there is an issue with the engine bottom end. Any advice? Thanks.
  15. M

    What have you done to your Freelander today

    More of a weekend job rather than what I've done today.... Resprayed centre console, fitted new stereo, and added a couple of USB ports.
Back
Top