Recent content by Jules59
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
-
Agree- its MOT'd till Feb 2023 - local garage has just put the MOTs up to £40 - but still worth it, IMO
-
Hi Nodge Yes indeed. Unfortunately the I don't know when the change took place and have no evidence, but I'm sure it was within the last 30 years. Despite obviously being a diesel, the V5c was never updated and it passed many MOTs as a diesel (Its not checked as part of the MOT test). I have...
-
-
From the Gov website
Eligibility: "You do not need to get an MOT if the vehicle was first registered more than 40 years ago and no ‘substantial changes’ have been made to the vehicle in the last 30 years."
"A vehicle alteration is a ‘substantial change’ if the technical characteristics of the...
-
Thought I'd try to help a chap from the fl2.com forum.
Looking for any suggestions on how to open a rear door on a Freelander 2 that is double locked but now wont response to the the door handles or key fob.
All usual things tried - inc hard reset etc
The door card cannot be removed without...
-
Delighted to say the S3 passed its MOT with no advisories.
Doors now stay shut and the heater & fan work.
I'm looking to sell. Any ideas where best to advertise.
-
+ VAT + Delivery = £51.60 unfortunately the devil is in the detail
-
-
Try it now ERC9453 - but sit down first
-
I dont know the manufacturing date but I believe it to be a late 2.25 diesel. The cylinder head says HRC1353 and the engine number is 10J00338B
-
-
yes I did but it didnt help much - Unfortunately it appears that the m16x1 threaded hole in the cylinder head is already too big to be tapped out to 3/8" BSP, so I'm going to have to take it on the chin and buy a ERC9543 adapter.
Shame LR chose M16x1 instead of M16x1.5 - a much more common...
-
Many thanks.
I didnt realise later heads changed to "american" metric m16x1 (not M16x1.5) The adapter ERC9453 is about £50 !! :eek: (probably why it the heater was never connected ), it is x10 the price of the imperial - typical.
Would it be possible or sensible to use a 3/8BSP tap in the metric...
-
Oddly the heater control valve is fitted at the front of the engine but the hose is blanked before the connection with the long pipe that goes to the back.
The connector I bought is part number 624091 . Is that correct ?