jamesDiscoTD5's latest activity

It's an attenuator. The coils are the same on the D2 and RRS, at least on later D2s.

They are but they'll still provide an "aggresive smoke" map if a customer asks. Definitely check what fery suggests first but there is a chance a previous owner asked for it.

And to confuse things even further I misread above and thought you'd put the link to the LR site, when actually it was @jamesDiscoTD5 ! Anyway, got the answer I needed - thanks all.

Should be M12. https://parts.jaguarlandroverclassic.com/parts/index/part/id/14.55794.56216.60034/brand/land-rover/

Ride height sensors are RQH100030. Genuine are £110 each so I wouldn't bother. I've had a pair of the Britpart sensors for over nearly 4 years without issue. They're a 3rd of the price. The Britpart "OEM" ones are also available for a price...

I think that was the Pace 4x4 injector loom. It claims to be sealed to stop the oil going up the loom. The genuine injector loom is no longer available from LR. I've had the Britpart AMR6103G loom for 3+ years without issue.

Just to wrap this up, I finally got around to fitting this mount. I did pretty much what I said above. A steel plate underneath to spread the load, 4 pan head screws and washers from below and nuts and washes above. No significance to the...

It appears it was an unfortunate choice of photograph. That's not where the tablet would be positioned when green-laning, which is the only time it is used - it would be much lower, overlapping the radio. It does stick up a bit above the...

Thanks James, that's really helpful.

It's 1.5 metres. I've never really tested how far it goes but I only use it for laning and it's more than enough for that. It'd probably be fine with a shorter antenna. One of these. It's taken a beating from a few branches without issue. The...

15mm. It's just big enough for a CB mount that's where I have mine fitted.