Recent content by hughandjen
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
H
Very rare car one of 30 in Rioja red.
100k miles. Recon engine at 90k from Turner engineering.
Huge history file including original sale document.
10 months MOT.
Grom blue tooth kit fitted.
Bad points.
Some age related marks on body
Headlining sagging
Cruise isn’t working or aircon
Clock goes...
-
H
I think I know what the problem is. I ordered a pair or callipers and had been sent two left hand side ones. After fitting them the bleed nipple on the right hand one is at the bottom and I think this is causing an air lock.
I’m going to get it replaced and se if that helps
-
H
I’m going to have one more go at bleeding the system
-
H
To be honest i did two but couldn’t reach the back one. But no bubbles came out of the other two
-
H
I’ve done it a couple of times now and no sign of any bubbles.
-
H
Update guys
No air in the system.
The pedal pushes to the floor. After a couple of presses it is firm again but after releasing it goes to the floor again.
The TC light also comes on when I press the pedal
Any ideas??
-
H
That is absolutely brilliant thank you
-
H
1999 P38 4.6 Thor
Hi guys. Put new front callipers on the truck and can’t bleed this system!!!
I am having trouble downloading Rave
Is there anyone who can give me a step by step guide?
Apparently these cars have their own way of doing this
Thanks in advance
-
H
Just a quick update. It turns out the tip has snapped off the rocker. Luckily the bits are all there and haven’t lodge anywhere
-
-
-
H
As there appears little wear on t he cam he suggests I remove the lifter and free it off then refit it as it will now be paired to the cam. Putting in a new lifter will likely cause more damage.
-
H
Thanks for the great advice. Just talked to Ray at V8 developments and he has given me some excellent advice
-
H
I’m going to have a good look in t morning
Thanks I’ll have a good study at it tomorrow
-
H
Spent all day stripping the engine down. When I got to the pushrods and valance lifters my problem became obvious. One lifter is jammed and the push rod is just rattling about. I hope it hasn’t done any more damage.