Recent content by Eat

a up any one had to replace the diff bearing the one connects diff to prop rear ?

replaced the gearbox mounts today they must have been original next is the engine mounts. hope it sorts the thumping when reversing.

Hi Can anyone tell me which antifreeze (colour) to use in the series 3 it has none at the moment ? Cheers

repaired the back door panel with new hardboard just not able to pinion bearing for a few weeks

put grease in the uj joints and seems a little better but I think James has diagnosed the problem its the pinion bearing saying that drove very well felt quite responsive steering good and quite light do you need to take the diff off to replace the bearing

cheers James will give it a go going to use it for a while and see if anything else goes wrong first it has plenty of oil in the diff so would think it will last

thanks for comments back seats in now had a look at the diff seams ok no play in the pinion

thanks James what's the best way to check it

its a PASS bit of a whine when I decelerate from the rear diff any ideas ???

new flexi fitted and clutch working again try for MOT in the next few days and lets hope it passes

Got to the MOT station and drove their fine handed the keys to the tester he goes out and short time later returns says sorry mate no clutch. Managed to bleed the slave cylinder and get it home and today changed the master cylinder but still no clutch. Turns out the flexi hose has given up so...

hi its MOT day tomorrow and started to fit rear seats

Anyone know if defender type back windows were fitted out of the factor to series 3 CSW I have noticed that I have them but sure it came to me as original cheers

Has anyone had a problem with hazards they flash quick and quite dim, could it be the flasher unit? Cheers

These have one in stoke with photos http://www.landrovercentre.com/