Recent content by dwabbit
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
D
Will take some tomorrow after noon
-
D
Im running a 300 tdi disco with an ac compresdor for my air supply
It fills a 16lt tank up in about 20seconds to 150psi
Its used to power my air horns and inflate tyres if i need to . The electro clutch on compressor is activated from a pressure switch on tank
-
D
I recieved a life time ban from the national 4x4 response forum
Because i asked why did no from from any of the 4x4 response group attend a missing person search
When every other 4x4 volenteer group in the area attended. Plus over 100members of the public. I asked was the reason they not...
-
D
Fitted bullbar to my winch bumper today
-
D
that is why we broke away from the 4x4 response network and went on our own and it was the best thing we ever did.
now working with the local police and ambulance service plus local parish councils helping out people in need
-
D
As the rules on the crb checks have been changed . Im with a response group and according to the new agency that does them we do not fullfill the requirement to get one .
Mainly we do not work with vunerable people on a regular basis and would not be alone with them.
.The system now has some...
-
D
its leaking like hell and stiff as hell
-
D
Which companies will take them
-
D
Just swapped out my steering box
Just wondering what to do with it.
As i got a used replacement. Its just sitting on bench leaking.
Do some companies take them to refurb.
Dont want to bin it. If it can be brought back to life
-
D
just some pointers for you
Identifying and suppressing radio interference | How a Car Works
Noise Suppression Guide - Noise Suppression Guide
A whining that rise and lowers in pitch in time with engine speed is generally caused by the alternator.
The problem could be...
-
D
Is the interference on fm or mw/lw
You may need to fit supressors to the items causing the problems
Will try and dig out my intrerference hand book from my ham radio days later today
-
-
D
i want to test power up my winch. At moment I don't have a solenoid fitted waiting for it to be delivered.
its a superwinch EPi9000 motor has Ground,F1,F2,A connections. which connections would i need to connect to battery to spin it up.
-
D
Fuse are marked with the current that they will continuously pass (at a standard temperature) without blowing, known as the continuous rating. It is good practice not to allow the continuous current to exceed 75% of the fuse's rated value to accommodate momentary current surges that might cause...
-
D
If i remember right there is a difference
One will blow at its rating the other will take the current but blow a twice its rating