DanClarke's latest activity

Dishwashers to me are a waste of time, ours is only used a handful of times a year. If it was up to me id have another set of drawers in place of it but no she still wants it to clean the all the bits of the cooker. They do come up like new so I...

Does a cotton sheet have a nap at all?

This seems a good reading site ... https://www.thesnookerforum.co.uk/board/forum/snooker-billiards-equipment/tables/1019157-snooker-table-nap

Eye has no idear. You can see random lines along the 8 foot lenf. Its a cotton flat sheet yer buy ferra bed from dunelm. 15 sovs just assa test to see iffit wuks. Table is flat. Monitoring that to see iffit bends and needs more support later on.

Is yer nap going along the lenff of the table or across the widff ?

A cotton cloff makes yer nooker balls run fast. Eye assume less friction than the propper fing.

When our illuminated illustrious leader spoke(peace be upon him). I was inspired by his thoughts on actual real women with proper anatomy in regards to driving Landrovers. As a genuine parts real men not third party prosthetic added. We should...

So after yesterday's sunny weather, today it is drizzly and has rained all night. It is supposed to stop by lunchtime.:rolleyes: Off to town this arvo for some shopping and to show the vet the dog's teef. Have a good day folks!

No but you are right! Or do like people did before steam irons became a "thing", either iron it slightly damp, or wet a cloth like an old tea towel and iron it through that. I find that even with a steam iron you sometimes still need to do this...

This is one of the things I am doing. I spent a few hours last night watching YouTubes on repairing strimmers that don't run very well. One thing that is fun is that none of mine ever came with air filters. So it is a bit surprising that they...

Sunny here but memories of what happened to it yesterday are very vivid so I won't hold my breath for the rest of the day.

Morning All. :D Dull & Dismal today (but maybe that's just a reflection on me). :) Have a great day! :D

Steam iron ? Sorry should have went to the end of Fred 😮

Check the fuel lines thay perish

Morning all a bit dull t'day rain forecast fer later have a good un

Cloff fitted. 6 pockets cut. Not the best pocket cuts but eye ain't bovvurd. They fold round the corners ok. Need to remark me measurements as eye have just covered them wiv cloff. Nite.

As the former owner of a 110 and a td5( long wheel base) and now a series 2a, this doesn't just " strike a chord" it strikes too many to mention 😉!!!¡¡¡

Fink its flat enuff. Staples going in now. Tis a good job me staple gun issa a propper one that dun't need me air compressor. Old hand type. Eye has watched the professional fitters ont youtube fitting a cloff anorl.

Gorra steam iron. Never used it so will experiment.

Put some padding on top of the MDF (a folded up thick bed sheet is good) and then iron your on top of that. A steam iron is best but if you don't have one then you could try dampening your sheet and then iron it - this should steam the creases...

Ask yer dorris

Steam J

Don’t ask me. I would just wear it the wrinkles (well most) can’t be seen and some disappear, well in my shirts that is J

What are they called ? Where may I purchase some from ?

Must be a bit of a crawler. Surely the longer making weaker support especially with the overhang.🤨

A quick question for the Plumberists here, can you buy 'caps' for washing machine fittings, say when a machine is removed but you don't want to leave the fitting bare on the pipe ?

Origionally it were a test to use and see if me mdf 18mm sheet stayed straight. But as eye does more to it to make it, it is starting to become the final fing. The build is slow but going well. Precosion engineering. Had some measuring problems...

W has just reminded me that when they had that copper bath they discovered that they had to be very careful with it especially when the kids used it. Thye had to put cold water in first then gradually add the hot, as if you put the hot in first...

I have been informed that Jay Blades and his wife have split up, after 18 months. Apparently she cannot do anything right and cannot be good enough for him, in the tearful video apparently there are shots of her blue-painted furniture with...

A lot of peeps buy an Aga to put on show, they don't use it cos of the cost and problems. They has an ornery cooker tucked up the side that they use most of the time. 🤣 🤣 🤣 🤣