No worries - the injector shield isn't as bad as it looks, just be careful you don't overtighten the nuts as the brass inserts in the cam cover / intake manifold can shear off. IIRC once you have the HVAC plenum and the 'L' shaped trim off from...
I managed to get to the leakoff pipe no bother in the end just took my time and it all came easily.
The only issue was the o-rings didn't turn up today so that's it out of action until they turn up.
Haven't addressed the wiring issue.
The wiring looks to be in the right place to be for the refrigerant pressure sensor, the fuel leak is 'most likely' the 'O' ring for the bleed-off line connection, these should be what you need https://www.ebay.co.uk/itm/176330414485
Don't drop...
Absolutely bang on with the AC pressure sensor there! It looks like some wiring from the ECU was rubbing against it and then its broken.
It's snapped right at the connector so will have to try and re pin it. Thanks for that!
I ordered those o...
The thing is, I have no idea where to even start looking 😅
I'm seriously thinking of hanging out in a car park and asking an L322 owner if I can look at their engine bay 🤣
So, took a bit of the engine bits off this evening to find the source of a diesel leak. Luckily it was near the front of the engine so I didn't need to somehow squeeze the injector cover off to find it.
It's coming from that brown to darker...