Badger688's latest activity

Not if it's set like i explained here https://www.landyzone.co.uk/land-rover/recommendation-for-d2-owners.184078/

Yup, but I think it's probably wishful thinking :D About fuel consumption.... I've built an arduino based system that connects to the ECU, reads rpm, speed, and injection quantity and calculates a litres per 100k figure. I need to spend some...

Thanks Kev. I had a look seem to be alot of different central locking issues. Will keep looking. Much appreciated

Sounds like your going to need a reader to have a look at the BCU settings. Also have a look on here to see if anyone else has similar problems with locking/unlocking? Kev

It does however! Give you a code to where that BCU is going around the world?? Kev

Did you change it?? Kev

Unless you have a ready supply of Caps around your area??? Your going to have to use social media?? Or scrap yards local to you may be a better idea, just for the top. Kev

Fitted the replacement caliper. Pic of new and old... old one is super scabby, I painted it with high temp paint when I first fitted it, road salt and heat has seen it off. I had to punch the piston out using a BFH via the cable port, tried...

have you checked fuse 13 engine compartment,fuse 21 passengers compartment

You might want to pop over Hi, you might want to pop over to 'Introduce Yourself' first! There is a wealth of knowledge on here, let us know what your Driving, where you are? Post your problem (we can see it) get the help! And let us know if it...

Hi Everyone, The time has come, I thought I would be spared, but no. I have coolant disappearing and I can see mayonnaise in the oil, the car temperature is normal. It has 140.000 Km So I will do this, It will be my first head gasket change...

Have you looked at search engine on LZ?? There may be some answers for you?? Had my SRS lights on for a couple of weeks! Nothing wrong with any the electronic connections! But fixed by replacing the Air Bag Squib. Kev

Due to the price of full lenghth ones, I bought two half ones and cut one down to make a full one. Also gives the potion to use only half if needed. .

Richards being ordered. Body needs one bit welded, rest is solid.

As above! But if no change! Take it back to garage? Listening to your video! Sounds like garage left a 'Spanner' somewhere??? Kev

5W30 is suitable for operating temperature between -25°C and 25°C, and 5W40 has a range of between -25°C and 35°C. In terms of oil flow, 5W30 has greater flow than 5W40. However, for providing higher pressure, 5W40 is superior. Out of the two...

it is sitting next to 10 3D resin mineral wagons curing in the sunlight

Yes, nothing on FB marketplace and eBay just new shops these days. 🤷‍♂️

Have you searched the usual?? Kev

You better do somehow to read the fault code rather than chasing in blind or listening to those who have no ideea, i can tell you that there's no earth point under the wheel arch which would trigger the 3 amigos while see how many reasons can be...

Hi, https://www.landyzone.co.uk/forum/introduce-yourself.20/ first then i'll tell you more

Great - thanks ... this is my 2nd 50th, the first an L series without the plastic go faster strips, but beggars can't be choosers... I've also got a proper Land Rover ('53 plate TD5 ES Premium - 88k and only 3 owners from new, inc me). I've...

As above - is this allowed or do I have to post my freelander mini-resto thread in with the big scary boys? ;)

Thanks for info gentlemen, especially Si ----- fery, unit has been off and reinstalled using lots of joint sealer hylomar or silicoln, it was everywhere so may be in the filter, will take a look. I do not have Nanocom but do have a icarsoft...

Any pics??? Kev

Got a rear for 60. so got a tatty rear in garage, a decent front in garage, spare ram in garage, spare solenoid in kitchen ready to fit

Buy a block off Ebay, get it converted (1/4" BSP holes), for each ram I used 1/4" BSP male-female adaptor in block 1/4" BSP swivel 1/4" BSP 2m of hose with 1/4" BSP 14mm banjo crimped on Pump 1/4" BSP male-female adaptor in block 3/8" BSP 1m...

Ouch! I missed out on Nanocom on here to😳 (last week) Kev

I think that will be based on your location! Access to those types of services and costings?? Kev

I know, But! I still have mine still on? But all the rest has been taken off. Waiting for work to pick up, then I can update the rear 😁 Kev