Recent content by aribeiro

Hi, Just a brief update about the problem solution. One ABS sensor not working properly and I had to change the ABS block in the front. Problem is 85% solved :) I don’t have anymore the blocking situation. Now, only happened that while driving in the highway the 3 amigos came on. After stopping...

Hi, I want to get a bigger clearance to the ground. With a +2” I’m able to change the tyres from 235/70 to a 235/85 for example. With suspension and tyres changed I believe the distance to the ground can be extended around 12 cm. I usually drive in forest paths that have some holes or rocks and...

Hi, I need to change my suspension since my shock absorvers are dead. Since i still have the standard suspension height im considering to lift a bit.. My first is to buy springs and shock absorver +2" and install spacers on the back air springs. Any comments?

Hi, Are you aware of a diagnostic/configuration tool ( similar to Nanocom) that can be used for D2 and D3? Is nanocom the best solution?

i would point to the TC since i stop seeing TC light when it should appear during driving.. All the lights are shown during the self-check before ignition of the engine.

@Stanleysteamer I have removed the fuse of ABS and car is driving "normally". Normally means without breaking uncontrolled, of course, ABS, downhill assistance, higher suspension is deactivated. @sierrafery No "3 amigos" lights are not shown in any time.. unfortunnaly i dont have a nanocom or...

Hi, just coming again with a problem that im facing with my D2. It start happens that D2 brakes and lock some wheels (not always the same) when TC should work.. Light of TC is never shown (or ABS) but when im trying drive on a slippery terrain, i feel my car breaking (ABS style) until is fully...

meanwhile I order the second engine mount and next week I will ask a Land Rover expert mechanic to change it. Hope it solve the problem. Thanks everyone.

Hi, A few days ago, my mechanics told me that i should change the engine mount. I ask him to do it. But, when I pick up the car, I notice a big vibration when the car is not moving... I believe this is related... Questions: 1 - Is it normal to change only one engine mount? If not, could it be...

Mine is not really as shown in the pictures… but have the 44 pin chip… maybe this is a auto ECU on a manual

Hi, just tested to connect 12V to pin 1 of clutch plug. No reaction at all… Now only missing to push the ECU out and measure pin35 voltage… I will try to do it tomorrow..

Does anyone know how the C0294 look like and where is located? my car is a LHD and i look close to the fuse box for a orange connector but not found...

Hi, is there any way to find if the ECU is original from manual or auto transmission without the part number readable?

just confirmed that on my car there is no 14V on any wire from the cable… Tried with ignition off and on…

Hi @sierrafery , just to be clear, you measure de 14V in which wire? BG or BW? As soon as i arrive home this afternoon i will measure as well on my car.