Range Rover ABS problem!!!

Got a 95 4.6 HSE. Warning lights on - ABS, brakes and T/C. No faults
showing on diagnostic at main dealer. Symptons, very poor brakes!!

It has recently had some new brake pipes fitted. Dealer cannot find
out what is wrong. Has suggested fit a new ABS pump @ £800 and new
Booster unit @ £2323!!! Both plus labour and VAT! And that might cure
it.

Has anyone got any suggestions as to the best way forward?

Colin

Colin - The brake system has too much pressure most likely caused by
air in the system, have the brakes bled properly and I am sure it will
go away. I had a similiar problem when I would hit my brakes the
lights (ABC/TC/Brake) would come on then go off, this was due to air in
the system and over pressured.

-Michael.

colin wrote:
> Got a 95 4.6 HSE. Warning lights on - ABS, brakes and T/C. No faults
> showing on diagnostic at main dealer. Symptons, very poor brakes!!
>
> It has recently had some new brake pipes fitted. Dealer cannot find
> out what is wrong. Has suggested fit a new ABS pump @ =A3800 and new
> Booster unit @ =A32323!!! Both plus labour and VAT! And that might
cure
> it.
>
> Has anyone got any suggestions as to the best way forward?
>=20
> Colin

colin said:

Got a 95 4.6 HSE. Warning lights on - ABS, brakes and T/C. No faults
showing on diagnostic at main dealer. Symptons, very poor brakes!!

It has recently had some new brake pipes fitted. Dealer cannot find
out what is wrong. Has suggested fit a new ABS pump @ £800 and new
Booster unit @ £2323!!! Both plus labour and VAT! And that might cure
it.

Has anyone got any suggestions as to the best way forward?

Colin

Click to expand...

Yes..
Hi I am Chris Kam from Hong Kong. I got an 1995 made Range Rover P38A. I got all sort of problems include the one you mention.

Remember two weeks ago, while I am driving, the brake no function. Therefore I stop the engine and restart . I got a very poor brake. After that I park the car in the gargage. The day after I start the car, but the brake fluid inside the bottle goes up. the ABS, TC, Brake lights all on.

Because of that I got a very very very hard brake. I check with autologic, but nothing discover.

I grab a old fuse box from eBay, and change the Fuse box and the ABS reply (Yellow colour) and the one made by Simens. right now all lights turn off.

However, once I press the brake padel, I still see the ABS/TC/ Brake lights flash! But at least the brake is working. Therefore I think you should try to replce the fuse box. Good luck . Any problems, please email me at [email protected]