Doolinjames
Active Member
My next move is to c if I can get continuity I know disconnect the bags.
Datatek
Well-Known Member
Do not put an ohm meter across the bags, there is a small risk that they may fire.
Doolinjames
Active Member
Ok should the yellow plug on the passenger side have continuity with the drivers plug and what colour is the plug going from the srs ECU to the becm
Doolinjames
Active Member
Just ordered a nanacom anyway
Datatek
Well-Known Member
The circuit diagrams in RAVE will give you the answer to that question. I'll have a look this evening.
Doolinjames
Active Member
Hi the state of play today with my srs is al srs cables good continuity except small connector under seat black ok both sides brown and green nothing and brown and black nothing all checks back to ECU connector
Doolinjames
Active Member
Is the red plug on the on the rotary coupler have a 12volt feed when it's all connected up but don't connect up air bags.The same at the passenger side connection
