vcu test? white marks

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
R

richbay

New Member
Posts
7
i put some white marks on the vcu as it seems tight on lock, (i know this is normal, but i thought i would check) drove forward and back 5 times, on lock etc etc, about 5 metres at speeds of 5mph max, lines are lined up, have i got a problem , or just not excersised it enough
 
before yu get dispirited did yu use the Willo method? cos if yu dont mark it in the right places it dont work too well. do a search - it has been written up how to do it - or shout.......




MING!
 
mondo said:
Mark up the props as well as the vcu .

I cant remeber which prop spins seperate from the vcu
could be the rear ??
Click to expand...
aye up mondo. . . .ouse that there tratter doin ? . . . . .reet as mondo sis mark both i/p un o/p drive shafts un vcu. . . .take it on some slippy grass [golf course is best] un spin them there wheels. . . .lines should be outa line [meaning vcu worked] if not try agin ,if still the same then vcu is fooked . . . .
 
s2_laz.jpgYor ma waaf naaow.s2_laz.jpg
 
You must log in or register to reply here.

Similar threads

MollyNomad
Freelander 1 VCU Test
Replies
4
Views
885
MollyNomad
MollyNomad
G
2.5 NA won’t start after injection pump swap.
Replies
2
Views
155
Rougharse Racing
Rougharse Racing
D
FL2 Power steering strange issue after flywheel & clutch replacement.
Replies
0
Views
404
DanHughes92
D
proto57
Freelander 2 (LR2) Trouble Diagnosing Drivetrain Issue
Replies
13
Views
634
Nodge68
Nodge68
S
Disco 2 Passenger fusebox. Worth clean-up!
Replies
14
Views
1K
shedpuller
S
Back
Top