Oil sump plug

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

cooky

New Member
Posts
5
Is there a torque setting for the engine sump plug.

Going to change the oil and obviously fit a new seal to the plug but don't want to crush it and have it leak.

Thanks
 
Is there a torque setting for the engine sump plug.

Going to change the oil and obviously fit a new seal to the plug but don't want to crush it and have it leak.

Thanks
there is but i never bother wiff that ****e, tighten up and a nip should do it, always fit a new washer earthling. . . .:)
 
On the TD4 engine the torque setting for the sump plug is 28 NM, and I would advise you to use it. The threads in the sump are alloy and its a steel plug, if you strip the threads, you will be right in the ' S--te'.
 
On the TD4 engine the torque setting for the sump plug is 28 NM, and I would advise you to use it. The threads in the sump are alloy and its a steel plug, if you strip the threads, you will be right in the ' S--te'.
they do a talk settin fer the wheels as well. . .i dint bother wiff that ****e anorl, fact i only use it on head gaskets un bearings if i can be asked. . .:)
 
Back
Top