Morning all, does anyone have any sort of diagram for the window mechanism for the front drivers door?

Been playing with mine as it started churning and grinding and have managed to put a cable back in but something is still not right.

Thanks

once it has fell apart i cant see you being able to put it back together, normally the jockey wheels brake off causig the cable to wrap up everywhere, think you will need to fit a new regulator

Well the jockey wheels (plastic white wheels?) seem to be intact. the cable had come off and I have managed to get it back on.....however, there is something going on at the top of the door - due to the intense sunshine today, I gave up.

Perhaps will have another go tomorrow to see if I can get to the top part.

Ta

__________________
Even in the hard times they ate jelly

if you have the door casing off take the regulator out to take a good look, two 10mm bolts to seperate the glass from regulator, 4 10mm bolts hold runners and 1 10mm bolt holds motor, it all comes out the big hole at the bottom of the door,once its on the deck you should see the fault.

Excellent help! thanks there LR,

Will play tomorrow after printing this out

__________________
Even in the hard times they ate jelly

LR Guy, do you know all of these facts off the top of your head? You're so wise

__________________
-------------------------
www.surryskingdom.co.uk
-------------------------

land rover technician, work on these day in day out so thought id help out a bit

You should be employed (and paid) by the forum as all your inputs go straight to the point and are very helpful for each thread you reply on.
Thanks for all the members and keep the good things going.

__________________
will
Td4 MY01 Steptronic 5dr. (SE Epsom green)

well any proceeds would pay for next weeks beer

In a responsible job as yours (for the forum I mean) beer or any other alcohol is out of the question, so forget about the beers next week.

__________________
will
Td4 MY01 Steptronic 5dr. (SE Epsom green)