wiring help please

after checking everything and coming to the conclusion my door actuator is fubar i took the plunge and ordered a new one on line..............one problem ....i'm crap at wiring.the new actuator has five wires coming from it and the only colour of the five i can match up is black.........
so if any one could advise i would be very grapefruit...
new actuator wire colours are black
blue
green
white
brown
the actuator im trying to replce is on a 300tdi es disco can anyone help me pleeeeeeaaaaseee:doh:

Land Rover only use 4 wires.
Blue and green goes to the orange and pink slave wiring in the door.
Brown or white only one is used goes to the brown-pink wire in the door.
Black is ground.
If the drivers door locks but the other four open the reverse the slave wires.
What colour goes to what colour of the Land Rover wiring I haven't a clue I just use a meter to match them up.

many thanks discool guess i'll go and have a play whilst the sun is out

the central locking used to work off the key as ive never had fob but it packed up an its a ball ache when i want to put dog in the boot,(dog guard up)i have to drop back seat down an unlock from the inside ,,,,,rear door lock barrel buggered another on the list of jobs to do!

You must have the early 200 series system as you don't need a fob for it, but u can get one and programme it yourself. With the 300 system you can't start the engine without a fob.

no its definitely a 300 tdi,bought it with no fob central locking worked off the key then it packed up,,unfortunately all the breakers round here havent got a drivers door actuator,,,theres a light under the stereo that flashes when any of the passenger doors open but not when its the drivers door.i've read through all the previous questions asked but cant seem to find green box black box or owt

I did say 200 series system.. they were fitted in the first 1995 300 series discos perhaps the alarm that controls the CL remotely is missing

any suggestions as to what to do next then it is an early 300tdi and i,ve just found black box with co ax type plug!!!!!!!!looking in wrong place

concal said:

any suggestions as to what to do next then it is an early 300tdi and i,ve just found black box with co ax type plug!!!!!!!!looking in wrong place

Click to expand...

Thats it... you need to know frequency (Mz) that's printed on the lable, then you can get a new single button fob from the likes of Remotekey or a s/h one from eBay the program it to your system, it's a 'run a round' 8 second procedure releasing bonnet switch etc, it has been listed a few times in this forum or Google the web for the info then u will have remote central locking

thanks very much for your advice guess what i'll be doing at the weekend