What a bloody nightmare

Decided today to give my wifes disco 3 tdv6 a long awaited oil change .
Drained oil from below,as i carefully removed the oil filter it would not release easily upwards so i just released the fuel branch which has an electrical connection on top ,as i did this the lower pipe on the Y broke.
finished oil change,then had a look at the Y piece.No idea whether its low pressure/return to tank ? I thought i might be able to remove what i thought was the end of the plastic Y from the rubber coiled hose to then find that its a plastic fuel line shrouded in rubber.I have spent all day on the pc trying to find the part ,no joy. Will have to call the uk in the morning, as i never seem to have any joy with land rover at Brest(France).
Anyone else had this problem, im sure i cannot be the only person to have had this problem. Any solutions to this problem , where can i find the lr part number ?

Your best chance is to download Microcat, it's the L/R parts catalogue.
It'll have to be one that's cracked, & make sure it's the latest.
If you do, install it, BUT DON'T RUN IT, install the crack first, then run it.
It'll run for a couple of months, then you might have to re-set your pc clock back to when you first installed it, to get it to run.
Failing that, I hope your French is good, cos it's the parts dept of the main stealer.

i have micro cat but would need vin no or more info ,is it not repairable with push fit connectors even pressure pipe is not that high