wanted TD5 manual gearbox

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

john-m

New Member
Posts
7
Bit of a long shot but I need a TD5 manual gearbox for a 51 plate disco, anyone got one or know of one? cheers john
 
The bottom shaft has broken in the bit below gear lever, its gone where at oil ump bearing and where it goes into front part of box.

cheers john
 
if layshaft has just snapped at rear then its not a bad job to repair it isnt an unknown fault which they changed rear nut fastening to stop it,could be fixed simply ,unless its destroyed box what were symptoms
 
thanks for the replies james. the rest of the gearbox seems fine with no other bits found in the bottom of it. do you know what causes this to happen and do you know how much of the box you have to take to bits to replace the shaft.

cheers john
 
box needs to come apart completely (except you dont need to strip main shaft) ,hardest bit is rear seal collar ,i have special tool for removing it ,shaft £100 + vat ,its just a lr fault, i do quite a few , i could do it for £200 including parts put would cost £20 each way carriage but you could do it your self if competent with spanners ,apart from rear seal collar the only tools neded are bihex 10mm spanner or socket,32mm socket,brass punch,5mm allen key ,external circlip pliers ,
 
Back
Top